• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : FIRAT-AKADEMI-8834-4190
  • Article Type : Araştırma Makalesi
  • Publication Number : 2A0168
  • Page Number : 48-56
  • Doi : 10.12739/NWSA.2019.14.2.2A0168
  • Abstract Reading : 591
  • Download : 113
  • Share :

  • PDF Download

Issue Details

  • Year : 2019
  • Volume : 14
  • Issue : 2
  • Number of Articles Published : 3
  • Published Date : 1.04.2019

Cover Download Context Page Download
Technological Applied Sciences

Serial Number : 2A
ISSN No. : 1308-7223
Release Interval (in a Year) : 4 Issues

AA 6061 ALÜMİNYUM ALAŞIMININ TORNALANMASINDA KESME PARAMETRELERİNİN YÜZEY PÜRÜZLÜLÜĞÜNE ETKİSİNİN ANALİZİ VE OPTİMİZASYONU

Hasan Basri ULAŞ1

Bu çalışmada, AA6061 alaşımının işlenebilirliği, Taguchi metodu ve Varyans analizi kullanarak değerlendirilmiştir. İşleme parametrelerinin yüzey pürüzlülüğü üzerindeki etkileri araştırılarak optimum işleme şartlarının belirlenmesi amaçlanmıştır. Bu amaçla işleme parametresi olarak iki farklı kesici takım uç yarıçapı (0.4mm ve 0.8mm) üç farklı kesme hızı (200, 260 ve 320m/dak), üç farklı ilerleme miktarı (0.1, 0.15 ve 0.2mm/dev) ve üç farklı talaş derinliği (1, 1.5 ve 2mm) seçildi. İşleme deneyleri Taguchi L18 (21 x 33) dizinine göre tasarlanmıştır. İşleme deneyleri kuru kesme şartlarında CNC torna tezgâhında gerçekleştirilmiştir. İstatiksel analiz sonuçları ile deneysel çalışmada elde edilen sonuçlar karşılaştırıldı ve birbirlerini doğrular niteliktedir. Elde edilen analiz sonuçlarına göre yüzey pürüzlülüğü üzerinde en etkin parametrenin %68.47 katkı oranı ile ilerleme miktarı olduğu belirlenmiştir.

Keywords
AA6061 Alaşımı, İşlenebilirlik, Taguchi Metodu, Anova, Alüminyum,

OPTIMIZATION AND ANALYSIS OF EFFECTS OF CUTTING PARAMETERS ON SURFACE ROUGHNESS IN TURNING AA 6061 ALUMINUM ALLOY

Hasan Basri ULAŞ1

In this study, the machinability of the AA6061 alloy was evaluated using the Taguchi method and variance analysis. Optimum machining conditions was aimed to be determined by investigating the effects of cutting parameters on surface roughness. For this aim, the machining parameters were selected at two different tool tip radii (0.4mm ve 0.8mm), three different cutting speeds (200, 260 and 320m/min), three different feed rates (0.1 0.15 and 0.2 mm/rev) and three different depths of cut (1, 1.5 and 2mm). Machining experiments are designed according to the Taguchi L18 (21 x 33) array. Machining experiments were carried out on CNC turning under dry cutting conditions. Results of statistical analysis were compared with experimental results and these results have confirmed each other. According to the obtained analysis results, it was seen that the most influential parameters on surface roughness was feed rate by 68.47%.

Keywords
AA6061 Alloy, Machinability, Taguchi method, Anova, Aluminum,

Details
   

Authors

Hasan Basri ULAŞ (1) (Corresponding Author)

Gazi Üniversitesi
bulas@gazi.edu.tr | 0000-0002-9754-6055

Supporting Institution

:

Project Number

:

Thanks

:
References
[1] Florea, R.S., Solanki, K.N., Bammann, D.J., Baird, J.C., and Castanier, M.P., (2012). Resistance Spot Welding of 6061-T6 Aluminum: Failure Loads and Deformation. Materials and Design, Vol:34, pp:624–630.