• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-1426-818
  • Article Type : Araştırma Makalesi
  • Publication Number : 1A0100
  • Page Number : 494-506
  • Doi : 10.12739/
  • Abstract Reading : 1084
  • Download : 123
  • Share :

  • PDF Download

Issue Details

  • Year : 2010
  • Volume : 5
  • Issue : 3
  • Number of Articles Published : 7
  • Published Date : 1.07.2010

Cover Download Context Page Download
Technological Applied Sciences

Serial Number : 2A
ISSN No. : 1308-7223
Release Interval (in a Year) : 4 Issues

UÇUCU KÜL İKAMELİ BETONLARIN MÜHENDİSLİK ÖZELLİKLERİNİN TAHRİBATSIZ TEST YÖNTEMLERİ İLE BELİRLENMESİ

Serkan SUBASI 1 , Mustafa ÇULLU 2 , Hakan BOLAT 3 , Mehmet EMIROGLU 4 , Mürsel ERDAL 5

Bu çalışmada, Orhaneli termik santralinden elde edilmiş uçucu küller, beton içerisine çimento ağırlığının %0-30 oranlarında ikame edilerek deney numuneleri hazırlanmıştır. Hazırlanan beton karışımlarından 15 adet 15x15x15 cm ebadında küp numune üretilmiştir. 28 günlük kür işlemi ardından, beton numuneler üzerinde beton yüzey sertliği, pull-off direk çekme deneyi, ultrases geçiş hızı deneyi ve basınç dayanımı deneyleri gerçekleştirilmiştir. Elde edilen bu tahribatsız test metodu sonuçları kullanılarak çeşitli ampirik formüller ile beton basınç dayanımı değerleri hesaplanmıştır. Hesaplanan beton basınç dayanımı değerleri ile gerçek beton basınç dayanımı değerleri istatistiksel yöntemler kullanılarak karşılaştırılmıştır.

Keywords
Beton, Uçucu kül, Tahribatsız test yöntemleri, Mühendislik özellikleri, Basınç dayanımı,

INVESTIGATION OF ENGINEERING PROPERTIES OF FLY ASH SUBSTITUTED CONCRETE WITH NON-DESTDUCTIVE TESTING METHODS

Serkan SUBASI 1 , Mustafa ÇULLU 1 , Hakan BOLAT 1 , Mehmet EMIROGLU 1 , Mürsel ERDAL 1

In this study, test specimens were prepared using fly ash obtained from Orhaneli thermal power plant in the rates of 0-30%. Twelve numbers of cubic samples having 15x15x15 cm dimensions were obtained from the concrete mixes. Surface hardness, pull-off tensile strength test, ultrasonic pulse velocity test and compressive strength tests were performed on the concrete samples after the 28th days cure conditions. According to the non-destructive test results, concrete compressive strength values were calculated by using various empirical equations. Calculated compressive strength values and the experimental compressive strength values were compared with each other using statistical methods.

Keywords
Concrete, Fly ash, Non-destructive test methods, Engineering properties, Compressive strength,

Details
   

Authors

Serkan SUBASI (1)

Düzce Üniversitesi
subasi.serkan@gmail.com

Mustafa ÇULLU (2)

Gumushane Universitesi
mcullu@gumushane.edu.tr | 0000-0002-0454-7949

Hakan BOLAT (3)

Ankara Üniversitesi
hbolat@gmail.com

Mehmet EMIROGLU (4) (Corresponding Author)

Düzce Üniversitesi
mehmetemiroglu@duzce.edu.tr

Mürsel ERDAL (5)

Gazi Üniversitesi
merdal@gazi.edu.tr

Supporting Institution

:

Project Number

:

Thanks

:
References