• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-2202-1299
  • Article Type : Araştırma Makalesi
  • Publication Number : 2A0038
  • Page Number : 28-39
  • Doi : 10.12739/
  • Abstract Reading : 1060
  • Download : 118
  • Share :

  • PDF Download

Issue Details

  • Year : 2010
  • Volume : 5
  • Issue : 1
  • Number of Articles Published : 3
  • Published Date : 1.01.2010

Cover Download Context Page Download
Technological Applied Sciences

Serial Number : 2A
ISSN No. : 1308-7223
Release Interval (in a Year) : 4 Issues

PA 6 PLASTİK MALZEMESİNİN AKIŞ ÖZELLİKLERİNİN BASINÇ VE SICAKLIK DEĞİŞİMİNE BAĞLI OLARAK BELİRLENMESİ

Abdulmecit GÜLDAS 1

Bu çalışmada, mühendislik malzemelerinden olan farklı oranlarda cam elyaf katkılı Pa 6 malzemesinin akış özellikleri incelenmiştir. Ergiyik akış cihazı kullanılarak yapılan deneylerde takviyelendirilmemiş, %10 ve %20 oranlarında cam elyaf takviyeli Pa 6 malzemesinin sıcaklık ve basınç değişimine bağlı olarak akış özelliklerinin değişimi belirlenmiştir. Bu çalışmaya göre, Pa 6 malzemesinin ergiyik akış indeksi (EAİ) sıcaklık ve basınç artışına bağlı olarak doğrusal bir şekilde artmıştır. Takviye oranı arttıkça da EAİ değerinin azaldığı tespit edilmiştir.

Keywords
Takviyelendirilmiş polyamid 6, Cam elyaf, Akış özellikleri, Ergiyik akış indisi, Termoplastik malzemeler,

DETERMINATION OF THE RHEOLOGICAL PROPERTIES OF PA 6 PLASTIC MATERIAL ACCORDING TO THE PRESSURE AND TEMPERATURE

Abdulmecit GÜLDAS 1

Reinforcement materials add the plastics and its proportion change mechanical properties of plastics. But, mouldability of plastics is also altering, because of changing the properties of plastic. Consequently, flow properties of reinforced plastic should be necessary during molding. In this study, flow properties of Pa6 glass fiber reinforced by different rates were investigated. Pure Pa6, 10% and 20% glass fiber reinforced Pa6 are utilized in the experimental study using Melt Flow devices. Variations of flow behaviors of Pa6 are determined according to altering of temperature and pressure. In accordance with this study, the value of Melt Flow Index (MFI) of Pa6 materials is increasing as linear depends on increasing the temperature and pressure. In addition, the values of MFI are decreasing during increasing the proportion of glass fiber reinforced.

Keywords
Reinforced polyamid 6, Glass fiber, Rheological properties, Melt flow index, Thermoplastics materials,

Details
   

Authors

Abdulmecit GÜLDAS (1) (Corresponding Author)

Gazi Üniversitesi
aguldas@gazi.edu.tr

Supporting Institution

:

Project Number

:

Thanks

:
References