• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-5071-2445
  • Article Type : Araştırma Makalesi
  • Publication Number : 1A0211
  • Page Number : 991-1000
  • Doi : 10.12739/
  • Abstract Reading : 1107
  • Download : 120
  • Share :

  • PDF Download

Issue Details

  • Year : 2011
  • Volume : 6
  • Issue : 4
  • Number of Articles Published : 79
  • Published Date : 1.10.2011

Cover Download Context Page Download
Engineering Sciences

Serial Number : 1A
ISSN No. : 1308-7231
Release Interval (in a Year) : 4 Issues

GFRP KUTU PROFİLLER İLE BETONUN HİBRİT KULLANIMININ BETON KÜRÜNE ETKİLERİNİN İNCELENMESİ

Ferhat AYDIN 1 , Mehmet SARIBIYIK 2

Bu çalışmada; yüksek basınç dayanımı ile öne çıkan betonun, yüksek çekme dayanımına sahip Cam Fiber Takviyeli Plastik (GFRP) kutu profiller ile hibrit kullanımının beton kür özelliklerine etkileri deneysel çalışmalarla incelenmiştir. Yapılan çalışmalarda üretilen taze haldeki betonların bir kısmı plywood kalıplara, bir kısmı ise GFRP kutu profil içerisine doldurulmuştur. Kalıplardan çıkarılan beton numunelerinin bir kısmı 28 gün kür havuzunda bekletilmiş, kalan kısmı ise içerisine beton doldurulmuş GFRP kutu profiller ile birlikte doğal ortamda muhafaza edilmiştir. Beton numuneleri 28 gün sonra basınç testine tabi tutulmuş ve elde edilen sonuçlar grafiksel olarak kıyaslanmıştır. Deney sonuçlarında hibrit olarak kullanılan betona kür yapılmasına rağmen kür yapılan beton numunelere kıyasla çok az dayanım kaybına uğradığı tespit edilmiştir.

Keywords
Hibrit Malzeme, Kompozit, Basınç Dayanımı, Beton Kürü, FRP,

INVESTIGATION OF CURE EFFECT IN HYBRID USE OF GFRP BOX PROFILES WITH CONCRETE

Ferhat AYDIN 1 , Mehmet SARIBIYIK 1

In this study, concrete, which has high compressive strength, with Glass Fiber Reinforced Plastic (GFRP) box profiles that have high tensile strength, have been used as a hybrid materials and experimental study have been carried out to investigate the curing effects. In the experimental study, part of the fresh concrete is filled into the plywood mould and the other part of the concrete is filled into the GFRP box profiles. Part of the samples, which formed in wooden mould, are put into the curing water for 28 days and remaining of them and concrete filled into the GFRP box profiles waited in the natural condition. The compressive tests have been applied to the concrete samples and results are compared graphically. The experimental outcomes demonstrate that although the hybrid use of concrete was not kept in the curing condition the concrete samples were very little lost the strength.

Keywords
Hyrbid Material, Composite, Concrete Cure, Compressive Strength, FRP,

Details
   

Authors

Ferhat AYDIN (1) (Corresponding Author)

Sakarya Üniversitesi
ferhata@sakarya.edu.tr

Mehmet SARIBIYIK (2)

Sakarya Üniversitesi
mehmets@sakarya.edu.tr

Supporting Institution

:

Project Number

:

Thanks

:
References