• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-2090-1201
  • Article Type : Araştırma Makalesi
  • Publication Number : 2A0036
  • Page Number : 1-14
  • Doi : 10.12739/
  • Abstract Reading : 1036
  • Download : 128
  • Share :

  • PDF Download

Issue Details

  • Year : 2010
  • Volume : 5
  • Issue : 1
  • Number of Articles Published : 3
  • Published Date : 1.01.2010

Cover Download Context Page Download
Technological Applied Sciences

Serial Number : 2A
ISSN No. : 1308-7223
Release Interval (in a Year) : 4 Issues

TRASIN ÇİMENTO YÜZEY ÖZELLİĞİNE, HİDRATASYONA VE BASINÇ DAYANIMINA ETKİSİ

YILMAZ KOÇAK 1

Bu çalışmada, portland çimentosu (PÇ) ve tras katkılı çimentonun (TKÇ) yüzey etkileşim mekanizmaları araştırılmıştır. PÇ, tras ve TKÇ’nun fiziksel, kimyasal, mineralojik ve mekanik özelliklerinin yanı sıra tras-PÇ tanelerinin elektrokinetik potansiyelleri (zeta potansiyel) belirlenmiştir. PÇ ve tras ile hazırlanan çimento hamurları 2, 7 ve 28 gün küre tabi tutulmuştur. Bu hamurların, hidratasyon sırasında minerolojik yapısını ve faz gelişimini belirlemek için DTA-TG, XRD ve FT-IR analizleri yapılmıştır. Ayrıca 28 günlük mikro yapıları SEM ile belirlenmiş ve harç numuneleri dayanım testleri yapılarak incelenmiştir. Tras, PÇ’ye göre farklı elektrokinetik davranışlar ve yüzey özellikleri göstermiştir. Bu farklılıklar harç örneklerinin dayanımlarını etkilemiştir.

Keywords
Çimento, Hidratasyon, Mineroloji,, Tras, Yüzey Özellikleri,

THE EFFECT OF TRASS ON THE CEMENT SURFACE PROPERTIES, HYDRATION AND COMPRESSIVE STRENGTH

YILMAZ KOÇAK 1

In this study, surface interaction mechanisms of the portland cement (OPC) and trass blended cements (TC) were investigated. The physical, chemical, mineralogical and mechanical properties of OPC, trass and TC, as well as the electrokinetic potantials (zeta potantial) of trass-PÇ particles were examined. After cement pastes were prepared with OPC and trass, they were water-cured for 2, 7 and 28 days. The pastes were made using XRD, DTA-TG and FT-IR in order to determine their mineralogical composition and the determination of the phases developed during the hydration. Furthermore by SEM 28-day microstructures of pastes were determined and mortars were examined following strength tests. Trass has shown different electrokinetic behaviours and surface features compared to OPC. These variations effected on compressive strenght of mortar samples.

Keywords
Cement, Hydration, Mineralogy, Trass, Surface Properties,

Details
   

Authors

YILMAZ KOÇAK (1) (Corresponding Author)

Düzce Üniversitesi
yilmazkocak@hotmail.com

Supporting Institution

:

Project Number

:

Thanks

:
References