• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-2090-1204
  • Article Type : Araştırma Makalesi
  • Publication Number : 1A0106
  • Page Number : 564-572
  • Doi : 10.12739/
  • Abstract Reading : 1059
  • Download : 119
  • Share :

  • PDF Download

Issue Details

  • Year : 2010
  • Volume : 5
  • Issue : 3
  • Number of Articles Published : 11
  • Published Date : 1.07.2010

Cover Download Context Page Download
Engineering Sciences

Serial Number : 1A
ISSN No. : 1308-7231
Release Interval (in a Year) : 4 Issues

TRAS İKAME ORANININ PORTLAND ÇİMENTOSUNUN FİZİKSEL VE MEKANİK ÖZELLİKLERİNE ETKİSİ

YILMAZ KOÇAK 1

Mineral katkılar günümüzde çimento ya da betonun fiziksel ve mekanik özelliklerinin iyileştirilmesi gibi avantajları nedeniyle geniş bir kullanım alanı bulmaktadır. Bu katkılardan biri de trastır. Bu çalışmada trasın, çimentoda (PÇ 42,5 R) basınç dayanımına, priz süresine, su ihtiyacına ve hacim genleşmesine etkileri araştırılmıştır. Bu amaçla tras, ağırlıkça %0, %10, %15, %20 %25 ve %30 oranlarında Portland çimentosu yerine ikame edilmiştir. Sonuç olarak, tras ikameli çimento hamurlarının su ihtiyacı ve priz başlama süresinde, Portland çimentosu hamuruna göre nispeten bir artış belirlenmiştir. Portland çimentosu harçlarına göre 2, 7 ve 28 günlük basınç dayanımlarında bir azalma olmuştur. Ancak bu azalmaya rağmen %10 ve %15 oranlarındaki tras ikameli çimento harçlarının basınç dayanımlarının standart değerler arasında olduğu belirlenmiştir.

Keywords
Tras, Çimento, Priz Süresi, Su İhtiyacı, Basınç Dayanımı,

THE EFFECT OF TRASS REPLACED RATIO ON PHYSICAL AND MECHANICAL PROPERTIES OF PORTLAND CEMENT

YILMAZ KOÇAK 1

Nowadays mineral additives due to the advantages such as improving the physical and mechanical properties of cement or concrete a wide field of use are found. One of the waste materials is trass. In this study the effects of trass, to compressive strength, setting time water demand and volume expansion of the cement (OPC 42.5 R) were investigated. For this purpose, fly ash was added as a replacement for Portland cement in amounts of 0, 10, 15, 20, 25 and 30 weight %. As a result, setting time and water demand of the fly ash replaced cement pastes were determined a relatively increase according to Portland cement pastes. 2, 7 and 28 days compressive strengths has been decrease compared to the Portland cement. Despite this decrease, however, 10% and 15% of the trass replaced cement mortar compressive strength was determined to be between the standard values.

Keywords
Trass, Cement, Setting Time, Water Demand, Compressive Strength,

Details
   

Authors

YILMAZ KOÇAK (1) (Corresponding Author)

Düzce Üniversitesi
yilmazkocak@hotmail.com

Supporting Institution

:

Project Number

:

Thanks

:
References