• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fýrat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-5192-2491
  • Article Type : Araþtýrma Makalesi
  • Publication Number : 1A0248
  • Page Number : 1407-1416
  • Doi : 10.12739/1A0248
  • Abstract Reading : 453
  • Download : 108
  • Share :

  • PDF Download

Issue Details

  • Year : 2011
  • Volume : 6
  • Issue : 4
  • Number of Articles Published : 79
  • Published Date : 1.10.2011

Cover Download Context Page Download
Engineering Sciences

Serial Number : 1A
ISSN No. : 1308-7231
Release Interval (in a Year) : 4 Issues

INVESTIGATION EXPERIMENTALE DES JOINTS SOUDES EN T A SECTION CREUSE CIRCULAIRE

Messaoud SAIDANI 1

Cet article présente les résultats d'une recherche expérimentale sur le comportement des connexions T-end soudées à profil creux circulaire (CHS) des éléments soumis à une traction axiale. Un total de 22 échantillons ont été testés jusqu'à défaillance. Paramètres pris en compte pour l'enquête ont été la taille du tube et l'épaisseur de la couronne. L'épaisseur de la plaque cale a été maintenue constante pour tous les tests. L'orientation de la plaque cale par rapport au tube a été étudiée et a été retrouvé d’affecter la résistance du joint. Il y avait des preuves de retard de cisaillement en cours. L'analyse par éléments finis a été utilisée pour prédire les charges de rupture et comparaison est faite avec les résultats du test

Keywords
Connexion, Tubulaire, Soudée, Expérimentale,

EXPERIMENTAL INVESTIGATION OF WELDED T-END CONNECTION TO CIRCULAR HOLLOW SECTION (CHS)

Messaoud SAIDANI 1

This paper presents the results of an experimental investigation into the behaviour of welded T-end connections to circular hollow section (CHS) members subjected to axial tension. A total of 22 specimens were tested to failure. Parameters considered for the investigation were the tube size and the cap plate thickness. The cleat plate thickness was kept constant for all tests. The cleat plate orientation relative to the tube was investigated and was found to affect the joint strength. There was evidence of shear lag taking place. The finite element analysis was used to predict the failure loads and comparison is made with the test results.

Keywords
Connection, Tubular, Welded, Failure, Experimental,

Details
   

Authors

Messaoud SAIDANI (1) (Corresponding Author)

Coventry University
m.saidani@coventry.ac.uk

Supporting Institution

:

Project Number

:

Thanks

:
References
[1] Comite’ International pour le Developpement et l'Etude de la Construction Tubulaire, British Steel and the Commission of the European Communities, (1984). Construction with hollow sections. Corby Northants, UK.