+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
OLİVİN İKAMELİ BETONLARIN YÜKSEK SICAKLIK SONRASI DEĞERLENDİRMESİ
EVALUATION OF OLIVINE SUBSTITUTED CONCRETES AFTER HIGH TEMPERATURE |
| Olivin Atığı, Basınç Dayanımı, Yüksek Sıcaklık, Mikroyapı, Beton, |
| Olivine Waste, Compressive Strength, High Temperature, Microstructure, Concrete, |
|
Engineering Sciences, Year : 2024, Volume : 19, Issue : 3, Published Date : 1.07.2024 |
|
|
|
POWDER METALLURGICAL FABRICATION OF CO REINFORCED CUNISI MATRIX COMPOSITES: MICROSTRUCTURAL AND CORROSION CHARACTERIZATION
|
|
Mehmet Akkaş, Tarek Mousa K. TABONAH, Abdelsalam Mohamed A. ELFGHI, Cihan ÖZORAK |
| CuNiSi composites, Co reinforced, Powder metallurgy, Microstructure, Corrosion, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 4, Published Date : 1.10.2023 |
|
|
AISI 2205 VE AISI 8640 ÇELİK ÇİFTİNİN SÜRTÜNME SAPLAMA KAYNAĞI İLE KAYNAK EDİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF THE WELDABILITY OF AISI 2205 AND AISI 8640 STEEL COUPLE BY FRICTION STUD WELDING |
| Dubleks Paslanmaz Çelik, , Mikroyapı, AISI 8640, Sürtünme Saplama Kaynağı , AISI 2205, |
| Duplex Stainless Steel, Microstructure, AISI 8640, Friction Stud Welding, AISI 2205, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 2, Published Date : 1.04.2023 |
|
|
SÜRTÜNME SAPLAMA KAYNAĞI İLE BİRLEŞTİRİLEN DUBLEKS PASLANMAZ ÇELİĞİ VE ISLAH ÇELİKLERİNİN MİKROYAPI İNCELEMESİ
MICROSTRUCTURAL INVESTIGATION OF DUPLEX STAINLESS STEEL AND TEMPERED STEELS COMBINED BY FRICTION STUD WELDING |
| Mikroyapı, Mikrosertlik , Sürtünme Saplama Kaynağı, Dubleks Paslanmaz Çelik, Islah Çeliği, |
| Microstructure, Microhardness, Friction Stud Welding, Duplex Stainless Steel, Tempered Steel, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 1, Published Date : 1.01.2023 |
|
|
|
CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM
|
| Hybrid composite, corrosion, microstructure, copper, powder metallurgy, |
|
Technological Applied Sciences, Year : 2022, Volume : 17, Issue : 2, Published Date : 1.04.2022 |
|
|
|
INVESTIGATION ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF BORON NITRIDE NANOPARTICLE REINFORCED ALUMINUM-BASED COMPOSITES
|
| Composite, Powder Metallurgy, Aluminum, Boron Nitride,, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 3, Published Date : 1.07.2021 |
|
|
ÇOK KATMANLI KARBON NANOTÜP TAKVİYELİ ALÜMİNYUM ESASLI KOMPOZİTLERİN MEKANİK ÖZELLİK VE MİKROYAPI İNCELEMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALUMINUM BASED COMPOSITES REINFORCED WITH MULTI-WALLED CARBON NANOTUBES |
| Karbon Nanotüp, Alüminyum, Kompozit, Toz Metalürjisi, Mikroyapı, |
| Carbon Nanotube, Aluminum, Composite, Powder Metallurgy, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 1, Published Date : 1.01.2021 |
|
|
PASLANMAZ ÇELİK İLE DÜŞÜK KARBONLU ÇELİK MALZEMELERİN MIG KAYNAK YÖNTEMİYLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
AN INVESTIGATION OF JOINABILITY OF STAINLESS STEEL AND THE LOW CARBON STEEL MATERIALS BY MIG WELDING METHOD |
|
Yakup KAYA, GÖKHAN ÇAYIRHAN, Mehmet BÖKÜ, Nizamettin KAHRAMAN |
| MIG Kaynağı, Paslanmaz Çelik, Düşük Karbonlu Çelik, Mekanik Özellikle, Mikroyapı, |
| MIG welding, Stainless Steel, Low Carbon Steel, Mechanical Properties, Microstructure, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
|
THE EFFECT OF SINTERING TIME ON TENSILE STRENGTH OF NB-V MICROALLOYED POWDER METALLURGY STEELS
|
| Powder Metallurgy, Nb-V Microalloyed Steels, Microstructure, Tensile Test, Sintering Time, |
|
Technological Applied Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
SICAK DÖVME SONRASI KUMDA VE HAVADA SOĞUTULAN ÇELİKLERİN KESME KUVVETLERİ VE YÜZEY PÜRÜZLÜLÜK DEĞERLERİNİN İNCELENMESİ
THE INVESTIGATION OF SURFACE ROUGHNESS AND CUTTING FORCES OF STEELS COOLED IN SAND AND AIR AFTER HOT FORGING |
| Sıcak Dövme, Mikroyapı, İşlenebilirlik, Çelik, , Karbür, |
| Hot Forging, Microstructure, Machinability, Steel, Carbide, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 2, Published Date : 1.04.2019 |
|
|
HASSAS DÖKÜM YÖNTEMİ İLE ÜRETİLEN ALAŞIMLARIN MİKROYAPI VE SERTLİK ÖZELLİKLERİNİN ARAŞTIRILMASI
THE INVESTIGATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF ALLOYS PRODUCED BY INVESTMENT CASTING METHOD |
| Hassas Döküm, Mikroyapı, Sertlik, Alaşım, Metal, |
| Investment Casting, Microstructure, Hardness, Alloy, Metal, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
TRIP VE DP ÇELİKLERİNDE DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN MEKANİK ÖZELLİKLERE ETKİSİ
EFFECT OF THE RESISTANCE SPOT WELDING PARAMETERS IN TRIP AND DP STEELS ON MECHANICAL PROPERTIES |
| DP ve TRIP çelikleri, Direnç Nokta Kaynağı, Gelişmiş Yüksek Mukavemetli Çelikler, Mikroyapı, Mekanik Özellikler, |
| DP and TRIP Steels, Resistance Spot Welding, Advanced High Strength Steel (AHSS), Microstructure, Mechanical Properties, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
ISIL İŞLEM UYGULANMIŞ ORTA KARBONLU ÇELİKTE MİKROYAPI DEĞİŞİMİNİN BULANIK MANTIK İLE TAHMİN EDİLMESİ
ESTIMATION WITH FUZZY LOGIC OF THE MICROSTRUCTURE CHANGE IN HEAT TREATED MEDIUM CARBON STEEL |
| Isıl işlem, Mikroyapı, Bulanık Mantık, Orta Karbonlu Çelik, Mamdani Yöntemi, |
| Heat treatment, Microstructure, Fuzzy logic, Medium Carbon Steel, Mamdani method , |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 4, Published Date : 1.10.2017 |
|
|
Ti6Al4V ALAŞIMININ FİBER LAZER KAYNAK KABİLİYETİ
FIBER LASER WELDABILITY OF Ti6Al4V ALLOY |
| Titanyum, Ti6Al4V Alaşımı, Mikroyapı, Fiber Lazer Kaynak, Mekanik Özellikler, |
| Titanium, Ti6Al4V Alloy,, Microstructure, Fiber Laser Welding, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
LAZER KAYNAĞI İLE BİRLEŞTİRİLEN AISI 2205 DUBLEKS PASLANMAZ ÇELİĞİN MEKANİK VE MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF LASER BEAM WELDED AISI 2205 DUPLEX STAINLESS STEEL |
| Paslanmaz Çelik , AISI 2205, CO2 Lazer Kaynağı, Mekanik Özellikler, Mikroyapı, |
| Stainless Steel, AISI 2205, CO2 Laser Beam Welding, Mechanical Properties, Microstructure, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
TRD YÖNTEMİYLE SUPAP ÇELİĞİ YÜZEYİNDE ÜRETİLEN KAPLAMALARIN MİKROYAPI VE AŞINMA ÖZELLİKLERİ
MICROSTRUCTURE AND WEAR PROPERTIES OF COATINGS ON VALVE STEEL PRODUCED BY TRD METHOD |
|
Serkan ISLAK, Cihan ÖZORAK, Cihangir Tevfik SEZGİN, Mehmet AKKAŞ |
| TRD, Kaplama, Supap, Mikroyapı, Aşınma, |
| TRD, Coating, Valve, Microstructure, Wear, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 3, Published Date : 1.07.2016 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN CO2 LAZER IŞINI KAYNAK YÖNTEMİYLE KAYNAK KABİLİYETİNİN ARAŞTIRILMASI
AN INVESTIGATION OF CO2 LASER BEAM WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Lazer Kaynağı, Martenzitik Paslanmaz Çelik, Isıl İşlem, Mikroyapı, Mekanik Özellikler, |
| Laser Welding, Martensitic Stainless Steel, Heat Treatment, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
ROBOTİK MIG KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN 5754 ALÜMİNYUM ALAŞIMININ MEKANİK VE MİKROYAPI ÖZELLİKLERİNE KAYNAK HIZININ ETKİSİ
THE EFFECT OF WELDING SPEED ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF ROBOTIC GMAW WELDED 5754 AlUMINIUM ALLOY |
| Alüminyum ve Alaşımları, Robotik, MIG, Mikroyapı, Mekanik Özellikler., |
| Aluminium and Alloy, Robotic, MIG, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 1, Published Date : 1.01.2015 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN SÜRTÜNME KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF JOINABILITY BY FRICTION WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Martenzitik paslanmaz çelik, AISI 420, Sürtünme Kaynağı, Mikroyapı, Mekanik Özellikler, |
| Martensitic stainless steel, AISI 420, Friction Welding, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
AISI 2205 / AISI 1020 MALZEME ÇİFTİNİN SÜRTÜNRME KAYNAĞI İLE BİRLEŞTİRİLMESİ
A PAIR OF AISI 2205 / AISI 1020 METARIAL COMBINATION WITH FRICTION WELDING METHOD |
| Sürtünme Kaynağı, AISI 2205, Dubleks Paslanmaz Çelikler, AISI 1020, Mikroyapı, |
| Friction Welding, AISI 2205, Duplex Stainless Steels, AISI 1020, Microstructure, |
|
Technological Applied Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
TOZALTI ARK KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI KALINLIKTAKİ GRADE A GEMİ SACLARININ MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE MECHANICAL PROPERTIES OF DIFFERENT THICKNESS OF THE GRADE A SHIP PLATES JOINED BY SUBMERGED ARC WELDING |
|
Behçet GULENC , Nizamettin KAHRAMAN , Yakup KAYA, Ahmet DURGUTLU |
| Gemi sacı, Tozaltı ark kaynağı, Mekanik özellikler, Mikroyapı, Sertlik, |
| Ship plate, submerged arc welding, mechanical properties, microstructure, hardness, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
CO2 LAZER IŞIN KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI MALZEMELERİN (AISI 430-AISI 304) MİKROYAPI VE MEKANİK ÖZELLİKLERİNE YÜKSEK İLERLEME HIZININ ETKİSİ
THE EFFECTS OF HIGH WELDING SPEED ON MICROSTRUCTURE AND MECHANICAL PROPERTY OF DISSIMILAR WELDED COMPONENTS (AISI 430–AISI 304) BY CO2 LBW METHOD |
| Farklı Malzemeler (AISI 430–304), CO2 LBW, Kaynak Hızı, Mikroyapı, Mekanik Özellikler, |
| Dissimilar Components (AISI 430-304), CO2 LBW, Welding Speed, Microstructure, Mechanical Property, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
PLAZMA TRANSFERLİ ARK KAYNAK YÜZEY İŞLEMİYLE AISI 304 PASLANMAZ ÇELİK YÜZEYİNE WC-Ni-B4C KOMPOZİT KAPLAMASININ MİKROYAPISAL KARAKTERİSTİĞİ
MICROSTRUCTURAL CHARACTERISTIC OF WC-Ni-B4C REINFORCED COMPOSITE COATINGS ON AISI 304 STAINLESS STEEL BY PLASMA TRANSFERRED ARC WELD SURFACING |
| PLAZMA TRANSFERLİ ARK KAPLAMA, MİKROYAPI, KARBÜRLER, ABRAZİF AŞINMA, BOR KARBÜR, |
| Plasma transferred arc coating, Microstructure, Carbides, Abrasive wear, Bor carbide, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
Tİ51Nİ49 KOMPOZİTİNİN CU-Nİ ARA TABAKALI DİFÜZYON KAYNAĞINDA SICAKLIK VE SÜRENİN BİRLEŞMEYE ETKİSİNİN ARAŞTIRILMASI
THE INVESTIGATION OF THE EFFECT ON THE JOINING OF TEMPERATURE AND PERIOD ON THE Cu-Ni INTERLAYER DIFFUSION BONDING OF Ti51Ni49COMPOSITE |
| Ti51Ni49, Toz Metalurjisi, Cu-Ni Ara Tabaka, Ti51Ni49, Difüzyon Kaynağı, Mikroyapı, |
| Ti51Ni49, Powder Metallurgy, Cu-Ni Interlayer, Microstructure, Bonding, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
Al/SiC METAL KÖPÜKLERİN ÜRETİMİ ve MİKROYAPISI
MICROSTRUCTURE AND PRODUCED OF Al/SiC METAL FOAMS |
| Al , TiH2, SiC, Metal Köpük, Mikroyapı., |
| Al, TiH2, SiC, Metal Foam, Microstructure., |
|
Technological Applied Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|