+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
FARKLI MİNERAL KÖKENLİ AĞIR BETONLARIN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF MECHANICAL PROPERTIES OF HEAVY CONCRETE OF DIFFERENT MINERAL ORIGIN |
| Ağır beton, Betonun Mekanik Özellikleri , Radyasyon, Mineral Agregalar, Beton, |
| Heavy Concrete, Radiation, Mechanical Properties of Concrete, Mineral Aggregates, Concrete, |
|
Engineering Sciences, Year : 2024, Volume : 19, Issue : 1, Published Date : 1.01.2024 |
|
|
|
EFFECT OF TOOL ROTATIONAL SPEED IN FRICTION STIR LAP WELDING OF 7075-T651 Al ALLOY TO AISI 304 STAINLESS STEEL
|
| Sürtünme Karıştırma Bindirme Kaynağı, 7075-T651 Al Alaşımı, AISI 304 Paslanmaz Çelik, Takım Dönüş Hızı, Mekanik Özellikler, |
| Friction Stir Lap Welding, 7075-T651 Al Alloy, AISI 304 Stainless Steel, Tool Rotation Speed, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2024, Volume : 19, Issue : 1, Published Date : 1.01.2024 |
|
|
ELAJİK ASİT /PATATES NİŞASTASI İLE HAZIRLANAN FİLMLERİN SU TUTMA KAPASİTESİ ÜZERİNE ÇİNKO OKSİT NANOPARTİKÜLLERİNİN ETKİSİ
THE EFFECT OF ZINC OXIDE NANOPARTICLES ON THE WATER HOLDING CAPACITY OF FILMS PREPARED WITH ELAGIC ACID / POTATO STARCH |
| Nanopartikül, , ZnO-NP, Elajik asit,, Aktif film,, Mekanik özellikler, |
| Nanoparticles, , , ZnO-NP,, Elagic acid, Active film,, Mechanical properties, |
|
Ecological Life Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
PASLANMAZ ÇELİK İLE DÜŞÜK KARBONLU ÇELİK MALZEMELERİN MIG KAYNAK YÖNTEMİYLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
AN INVESTIGATION OF JOINABILITY OF STAINLESS STEEL AND THE LOW CARBON STEEL MATERIALS BY MIG WELDING METHOD |
|
Yakup KAYA, GÖKHAN ÇAYIRHAN, Mehmet BÖKÜ, Nizamettin KAHRAMAN |
| MIG Kaynağı, Paslanmaz Çelik, Düşük Karbonlu Çelik, Mekanik Özellikle, Mikroyapı, |
| MIG welding, Stainless Steel, Low Carbon Steel, Mechanical Properties, Microstructure, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
PLA/BOYNUZ BİYOKOMPOZİTLERİN TERMAL VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THERMAL AND MECHANICAL PROPERTIES OF PLA/HORN BIOCOMPOSITES |
| Polilaktik Asit (PLA, Boynuz, Keratin, Biyokompozit, Mekanik Özellikler, |
| Polylactic Acid (PLA), Horn, Keratin, Biocomposite, Mechanical Properties, |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
|
INVESTIGATION OF MECHANICAL PROPERTIES OF HIGH-PERFORMANCE LIGHTWEIGHT CONCRETE WITH PUMICE AGGREGATE
|
|
Esra Tuğrul Tunç, Kürsat Esat ALYAMAC , Ragıp INCE, Zülfü Cınar ULUCAN |
| High-Performance Lightweight Concrete, Mechanical Properties, Compressive Strength, Statistical Analysis, Concrete, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 4, Published Date : 1.10.2018 |
|
|
Sİ3N4-BN KOMPOZİT TOZ SENTEZİNDE MEKANİK AKTİVASYONUN Sİ3N4 FAZ OLUŞUM KİNETİĞİNE ETKİSİ
THE EFFECT OF MECHANICAL ACTIVATION ON ?-SI3N4 PHASE FORMATION KINETICS IN SYNTHESIS OF SI3N4-BN COMPOSITE POWDER |
| BN , Si3N4, Seramik Kompozit, Mekanik Aktivasyon, Karbotermal İndirgeme ve Nitridasyon Yöntemi(KTİN) , |
| BN , Si3N4, Ceramic Composite, Mechanical Activation, Carbothermal Reduction and Nitridation Method (KTIN), |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
TRIP VE DP ÇELİKLERİNDE DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN MEKANİK ÖZELLİKLERE ETKİSİ
EFFECT OF THE RESISTANCE SPOT WELDING PARAMETERS IN TRIP AND DP STEELS ON MECHANICAL PROPERTIES |
| DP ve TRIP çelikleri, Direnç Nokta Kaynağı, Gelişmiş Yüksek Mukavemetli Çelikler, Mikroyapı, Mekanik Özellikler, |
| DP and TRIP Steels, Resistance Spot Welding, Advanced High Strength Steel (AHSS), Microstructure, Mechanical Properties, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
|
EFFECTS OF BASALT AGGREGATES ON CONCRETE PROPERTIES
|
| Basalt Aggregate , Concrete, Mechanical Properties, Fresh and Hardened Concrete Properties , Sem Analyses, |
|
Qualitative Studies, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
MEKANİK ALAŞIMLAMA/ÖĞÜTME YÖNTEMİ İLE ÜRETİLEN Al-SiC KOMPOZİTLERİN İNCELENMESİ
AN INVESTIGATION OF Al-SiC COMPOSITES PRODUCED BY MECHANICAL ALLOYING/MECHANICAL MILLING METHOD |
|
İjlal ŞİMŞEK, MUSA YILDIRIM, Tansel TUNÇAY, Dursun ÖZYÜREK, Doğan ŞİMŞEK |
| Alüminyum Kompozit, Mekanik Öğütme, Toz Metalürjisi, Atritör, SiC, |
| Aluminum Composite, Mechanical Milling, Powder Metallurgy,, Attritor, SiC, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
PP VE PP/TALK KOMPOZİTLERİN MEKANİK VE KÖPÜKLENME ÖZELLİKLERİ ÜZERİNE ERGİYİK SICAKLIĞI VE ENJEKSİYON BASINCININ ETKİLERİNİN İNCELENMESİ
INVESTIGATION OF THE EFFECT OF INJECTION PRESSURE AND MELT TEMPERATURE ON FOAMMABILITY AND MECHANICAL PROPERTIES OF PP AND PP/TALC COMPOSITE |
| PP Köpük, Köpük Ajanı, Hücre Morfolojisi, Mekanik Özellikle, Kompozit, |
| PP Foam, Foaming Agent, Cell Morphology, Mechanical Properties, Composite, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 1, Published Date : 1.01.2018 |
|
|
Cu-TiC KOMPOZİTLERİN MEKANİK VE FİZİKSEL ÖZELLİKLERİNİN YAPAY SİNİR AĞLARI (YSA) MODELİ İLE TAHMİNİ
ESTIMATION OF MECHANICAL AND PHYSICAL PROPERTIES OF Cu-TiC COMPOSITES BY ARTIFICIAL NEURAL NETWORKS (ANN)MODEL |
| YSA, Cu-TiC Kompozitler, Sıcak Presleme, Mekanik Özellikler, Fiziksel Özellikler, |
| ANN, Cu-TiC Composites, Mechanical Properties, Physical Properties, Hot Pressing, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
Ti6Al4V ALAŞIMININ FİBER LAZER KAYNAK KABİLİYETİ
FIBER LASER WELDABILITY OF Ti6Al4V ALLOY |
| Titanyum, Ti6Al4V Alaşımı, Mikroyapı, Fiber Lazer Kaynak, Mekanik Özellikler, |
| Titanium, Ti6Al4V Alloy,, Microstructure, Fiber Laser Welding, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
|
MICROSTRUCTURAL CHARACTERIZATIONS OF SINTERED W-VC-C COMPOSITES AND THEIR ELECTROCHEMICAL BEHAVIOURS IN 1 M H2SO4 AQUEOUS SOLUTIONS
|
| Mechanical Alloying, W Matrix Composites, VC , Corrosion, Polarization, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
LAZER KAYNAĞI İLE BİRLEŞTİRİLEN AISI 2205 DUBLEKS PASLANMAZ ÇELİĞİN MEKANİK VE MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF LASER BEAM WELDED AISI 2205 DUPLEX STAINLESS STEEL |
| Paslanmaz Çelik , AISI 2205, CO2 Lazer Kaynağı, Mekanik Özellikler, Mikroyapı, |
| Stainless Steel, AISI 2205, CO2 Laser Beam Welding, Mechanical Properties, Microstructure, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN CO2 LAZER IŞINI KAYNAK YÖNTEMİYLE KAYNAK KABİLİYETİNİN ARAŞTIRILMASI
AN INVESTIGATION OF CO2 LASER BEAM WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Lazer Kaynağı, Martenzitik Paslanmaz Çelik, Isıl İşlem, Mikroyapı, Mekanik Özellikler, |
| Laser Welding, Martensitic Stainless Steel, Heat Treatment, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
ROBOTİK MIG KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN 5754 ALÜMİNYUM ALAŞIMININ MEKANİK VE MİKROYAPI ÖZELLİKLERİNE KAYNAK HIZININ ETKİSİ
THE EFFECT OF WELDING SPEED ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF ROBOTIC GMAW WELDED 5754 AlUMINIUM ALLOY |
| Alüminyum ve Alaşımları, Robotik, MIG, Mikroyapı, Mekanik Özellikler., |
| Aluminium and Alloy, Robotic, MIG, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 1, Published Date : 1.01.2015 |
|
|
ISIL İŞLEM GÖRMÜŞ 30MnB5 ÇELİĞİNİN MEKANİK ÖZELLİKLERİNİN VE ÇENTİK DARBE GEÇİŞ SICAKLIĞININ İNCELENMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND TRANSITION TEMPERATURE OF TEMPERED 30MnB5 STEEL |
| 30MnB5, Isıl işlem, Mekanik özellikler, Dönüşüm sıcaklığı, Kırılma, |
| 30MnB5, Heat treatment, Mechanical properties, Transition temperature, Fracture, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 4, Published Date : 1.10.2014 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN SÜRTÜNME KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF JOINABILITY BY FRICTION WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Martenzitik paslanmaz çelik, AISI 420, Sürtünme Kaynağı, Mikroyapı, Mekanik Özellikler, |
| Martensitic stainless steel, AISI 420, Friction Welding, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
ENJEKSİYONDA KALIPLANMIŞ PP VE PP KOMPOZİTİN BİRLEŞME İZİ ÖZELLİKLERİNİN İNCELENMESİ
THE EXAMINATION OF WELD LINE PROPERTIES IN INJECTION MOLDED PP AND PP COMPOSITES |
| PP, cam elyaf, aky? analizi, mekanik özellikler, birle?me izi, |
| PP, Glass fiber, Flow analysis, Mechanical properties, weld line, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
BULANIK TEMELLI AKILLI VENTILATÖRDE FIO2 KONTROLÜ
FIO2 CONTROL AT INTELLIGENT VENTILATOR BASED ON FUZZY |
| Akıllı Sistemler, Bulanik Mantik, Mekanik Ventilator, Respirasyon, FiO2, |
| Intelligent System, Fuzzy Logic, Mechanical Ventilator, Respiration, FiO2, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
TOZALTI ARK KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI KALINLIKTAKİ GRADE A GEMİ SACLARININ MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE MECHANICAL PROPERTIES OF DIFFERENT THICKNESS OF THE GRADE A SHIP PLATES JOINED BY SUBMERGED ARC WELDING |
|
Behçet GULENC , Nizamettin KAHRAMAN , Yakup KAYA, Ahmet DURGUTLU |
| Gemi sacı, Tozaltı ark kaynağı, Mekanik özellikler, Mikroyapı, Sertlik, |
| Ship plate, submerged arc welding, mechanical properties, microstructure, hardness, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
ISIL IŞLEM UYGULANMIŞ D-VTKA TUTKALI ILE YAPIŞTIRILMIŞ SARIÇAM (Pinus Slyvestrist L.) ODUNUN YAPIŞMA VE BASINÇ DIRENCI
COMPRESSION AND BONDING STRENGTH OF HEAT TREATED SCOTCH PINE (Pinus Slyvestrist L.) WOOD BONDED WITH D-VTKA ADHESIVE |
| Yapışma Direnci, Basınç Direnci, Isıl İşlem, Sarıçam (Pinus slyvetsris L.), Mekanik Özelikler, |
| Bonding Strength, Compression Strength, Heat Treatment, Scotch Pine (Pinus slyvetsris L.), Mechanical Properties, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
CO2 LAZER IŞIN KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI MALZEMELERİN (AISI 430-AISI 304) MİKROYAPI VE MEKANİK ÖZELLİKLERİNE YÜKSEK İLERLEME HIZININ ETKİSİ
THE EFFECTS OF HIGH WELDING SPEED ON MICROSTRUCTURE AND MECHANICAL PROPERTY OF DISSIMILAR WELDED COMPONENTS (AISI 430–AISI 304) BY CO2 LBW METHOD |
| Farklı Malzemeler (AISI 430–304), CO2 LBW, Kaynak Hızı, Mikroyapı, Mekanik Özellikler, |
| Dissimilar Components (AISI 430-304), CO2 LBW, Welding Speed, Microstructure, Mechanical Property, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
KONİK DİŞLİ HIZ KUTUSUNUN GENETİK ALGORİTMA İLE TASARIMI
DESIGN OF BEVEL GEARBOX WITH GENETIC ALGORITHMS |
| Genetik Algoritma, Mekanik Tasarım, Makine Elemanları, Konik Dişli Çark Tasarımı, Hız Kutusu, |
| Genetic Algorithm, Mechanical Design, Machine Elements, Bevel Gear Design, Gearbox, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
YIĞMA YAPI OLUŞTURULMASINDA BAĞLAYICI ÖZELLİĞİ ARTIRILAN HARÇ KULLANILMASI VE ÖRGÜ TİPLERİNİN DEĞİŞTİRİLMESİNİN YATAY YÜK TAŞIMA KAPASİTESİNE ETKİSİ
USE OF HIGH-BINDING MORTAR MASONRY IN CONSTRUCTION AND THE EFFECT OF THE CHANGE OF BONDING TYPES ON THE CAPACITY OF LOAD BEARING |
| Katkı Maddesi, Yığma Duvar, Örgü Tipi, Mekaniksel Davranış, Bağlayıcı Özellik, |
| Additional Material, Masonry Wall, Bond Type, Mechanical Behavior, Binding Feature, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE SERAMİK TAKVİYELİ ALÜMİNYUM KOMPOZİT MALZEMELERİN ÜRETİMİ VE ÖZELLİKLERİNİN INCELENMESI
PRODUCTION OF CERAMIC REINFORCED ALUMINUM COMPOSITE MATERIALS BY USING POWDER METALLURGY METHOD AND DETERMINATION OF ITS PROPERTIES |
| Al-SiC kompozit, Al-FeBx Kompozit, Toz Metalurjisi, Mekanik Özellikler, Metalurji, |
| Al-SiC Composite, Al-FeBx Composite, Powder Metallurgy, Mechanical Properties, Metallurgy, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
ORTAM SICAKLIĞINDAKİ DEĞİŞİMİN BETONUN MEKANİK ÖZELLİKLERİNE ETKİSİ
EFFECT OF CHANGE AT THE AMBIENT TEMPERATURE ON MECHANICAL PROPERTIES OF CONCRETE |
| Beton, Ortam Sıcaklığı, Mekanik Özellikler, Basınç Dayanımı, Çekme Dayanımı, |
| Concrete, Ambient Temperature, Mechanical Properties, Compressive Strength, Tensile Strength, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
SU/ÇİMENTO (S/Ç) ORANININ AĞIR BETONLARIN FİZİKSEL VE MEKANİK ÖZELLİKLERİNE ETKİSİ
THE EFFECT OF WATER-TO-CEMENT (W/C) RATIO ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HEAVYWEIGHT CONCRETES |
| Ağır Beton, S/Ç, Fiziksel Özellikler, Mekanik Özellikler, Beton, |
| Heavy concrete, W/C, Physical Properties, Mechanical Properties, Concrete , |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
SOĞUK PRESLEME YÖNTEMİYLE ÜRETİLMİŞ Ni-Ti-Cu KOMPOZİTLERİN TLP DİFÜZYON KAYNAĞINDA SICAKLIĞIN BİRLEŞME ÜZERİNDEKİ ETKİSİNİN İNCELENMESİ
THE EFFECT OF TEMPERATURES ON THE TLP DIFFUSION BONDING OF Ni-Ti-Cu COMPOSITES MANUFACTURED BY COLD PRESSING METHOD |
| Ni-Ti-Cu,, Toz Metalurjisi,, Soğuk Presleme,, TLP Difüzyon Kaynağı,, Mekanik Özellikler., |
| Ni-Ti-Cu,, Powder Metallurgy,, Cold Pressing,, TLP Diffusion Bonding,, Mechanical Properties., |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|