+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
FARKLI MİNERAL KÖKENLİ AĞIR BETONLARIN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF MECHANICAL PROPERTIES OF HEAVY CONCRETE OF DIFFERENT MINERAL ORIGIN |
| Ağır beton, Betonun Mekanik Özellikleri , Radyasyon, Mineral Agregalar, Beton, |
| Heavy Concrete, Radiation, Mechanical Properties of Concrete, Mineral Aggregates, Concrete, |
|
Engineering Sciences, Year : 2024, Volume : 19, Issue : 1, Published Date : 1.01.2024 |
|
|
|
EFFECT OF TOOL ROTATIONAL SPEED IN FRICTION STIR LAP WELDING OF 7075-T651 Al ALLOY TO AISI 304 STAINLESS STEEL
|
| Sürtünme Karıştırma Bindirme Kaynağı, 7075-T651 Al Alaşımı, AISI 304 Paslanmaz Çelik, Takım Dönüş Hızı, Mekanik Özellikler, |
| Friction Stir Lap Welding, 7075-T651 Al Alloy, AISI 304 Stainless Steel, Tool Rotation Speed, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2024, Volume : 19, Issue : 1, Published Date : 1.01.2024 |
|
|
ELAJİK ASİT /PATATES NİŞASTASI İLE HAZIRLANAN FİLMLERİN SU TUTMA KAPASİTESİ ÜZERİNE ÇİNKO OKSİT NANOPARTİKÜLLERİNİN ETKİSİ
THE EFFECT OF ZINC OXIDE NANOPARTICLES ON THE WATER HOLDING CAPACITY OF FILMS PREPARED WITH ELAGIC ACID / POTATO STARCH |
| Nanopartikül, , ZnO-NP, Elajik asit,, Aktif film,, Mekanik özellikler, |
| Nanoparticles, , , ZnO-NP,, Elagic acid, Active film,, Mechanical properties, |
|
Ecological Life Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
PASLANMAZ ÇELİK İLE DÜŞÜK KARBONLU ÇELİK MALZEMELERİN MIG KAYNAK YÖNTEMİYLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
AN INVESTIGATION OF JOINABILITY OF STAINLESS STEEL AND THE LOW CARBON STEEL MATERIALS BY MIG WELDING METHOD |
|
Yakup KAYA, GÖKHAN ÇAYIRHAN, Mehmet BÖKÜ, Nizamettin KAHRAMAN |
| MIG Kaynağı, Paslanmaz Çelik, Düşük Karbonlu Çelik, Mekanik Özellikle, Mikroyapı, |
| MIG welding, Stainless Steel, Low Carbon Steel, Mechanical Properties, Microstructure, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
PLA/BOYNUZ BİYOKOMPOZİTLERİN TERMAL VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THERMAL AND MECHANICAL PROPERTIES OF PLA/HORN BIOCOMPOSITES |
| Polilaktik Asit (PLA, Boynuz, Keratin, Biyokompozit, Mekanik Özellikler, |
| Polylactic Acid (PLA), Horn, Keratin, Biocomposite, Mechanical Properties, |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
GENÇLERİN AÇIK MEKÂN KULLANIMLARI: KTÜ KANUNİ KAMPÜSÜ ÖRNEĞİ
YOUTHS USES OF OPEN SPACES: EXAMPLE OF KTU KANUNI CAMPUS |
| Gençler, Kampüs, Açık Mekân, Mekânsal Özellikler, |
| Youth, Campus, Open Space, Spatial Properties, |
|
Social Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
|
PERFORMANCE STUDY ON CEMENTS
|
| Cement, Concrete, Durability, Physical and Chemical Properties, Performance, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
|
INVESTIGATION OF MECHANICAL PROPERTIES OF HIGH-PERFORMANCE LIGHTWEIGHT CONCRETE WITH PUMICE AGGREGATE
|
|
Esra Tuğrul Tunç, Kürsat Esat ALYAMAC , Ragıp INCE, Zülfü Cınar ULUCAN |
| High-Performance Lightweight Concrete, Mechanical Properties, Compressive Strength, Statistical Analysis, Concrete, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 4, Published Date : 1.10.2018 |
|
|
|
EFFECT OF ORIENTATION ANGLES ON VIBRATION PROPERTIES AT CARBON FIBER REINFORCED POLYMERIC COMPOSITES
|
|
Muhammet Raci Aydın, ÖMER GÜNDOĞDU, BARBAROS KAYA, GÜRBÜZ BAYRAKTAR, OKAN KAAN AKSUOĞLU, OSMAN HOTUNLU |
| Laminated Composite Structure,, Fiber Orientation Angle, Vibration Properties, Damding Ratio, Flexural Stress, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
TRIP VE DP ÇELİKLERİNDE DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN MEKANİK ÖZELLİKLERE ETKİSİ
EFFECT OF THE RESISTANCE SPOT WELDING PARAMETERS IN TRIP AND DP STEELS ON MECHANICAL PROPERTIES |
| DP ve TRIP çelikleri, Direnç Nokta Kaynağı, Gelişmiş Yüksek Mukavemetli Çelikler, Mikroyapı, Mekanik Özellikler, |
| DP and TRIP Steels, Resistance Spot Welding, Advanced High Strength Steel (AHSS), Microstructure, Mechanical Properties, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
DİETANOLAMİN YAN GRUP İHTİVA EDEN METİL METAKRİLAT KOPOLİMERİNİN TERMODİNAMİK ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THERMODYNAMIC PROPERTIES OF METHYL METHACRYLATE COPOLYMER CONTAINING DIETHANOLAMINE SIDE GROUP |
| 4-Dietanolaminometil Stiren-ko-Metil Metakrilat, Ters Gaz Kromatografisi, Camsı Geçiş Sıcaklığı, Termodinamik Özellikler, Entropi, |
| 4-Diethanolaminomethyl Styrene-co-Methyl Methacrylate, Inverse Gas Chromatography, Glass Transition Temperature, Thermodynamic Propertieses, Entropy, |
|
Physical Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
|
EFFECTS OF BASALT AGGREGATES ON CONCRETE PROPERTIES
|
| Basalt Aggregate , Concrete, Mechanical Properties, Fresh and Hardened Concrete Properties , Sem Analyses, |
|
Qualitative Studies, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
PP VE PP/TALK KOMPOZİTLERİN MEKANİK VE KÖPÜKLENME ÖZELLİKLERİ ÜZERİNE ERGİYİK SICAKLIĞI VE ENJEKSİYON BASINCININ ETKİLERİNİN İNCELENMESİ
INVESTIGATION OF THE EFFECT OF INJECTION PRESSURE AND MELT TEMPERATURE ON FOAMMABILITY AND MECHANICAL PROPERTIES OF PP AND PP/TALC COMPOSITE |
| PP Köpük, Köpük Ajanı, Hücre Morfolojisi, Mekanik Özellikle, Kompozit, |
| PP Foam, Foaming Agent, Cell Morphology, Mechanical Properties, Composite, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 1, Published Date : 1.01.2018 |
|
|
Cu-TiC KOMPOZİTLERİN MEKANİK VE FİZİKSEL ÖZELLİKLERİNİN YAPAY SİNİR AĞLARI (YSA) MODELİ İLE TAHMİNİ
ESTIMATION OF MECHANICAL AND PHYSICAL PROPERTIES OF Cu-TiC COMPOSITES BY ARTIFICIAL NEURAL NETWORKS (ANN)MODEL |
| YSA, Cu-TiC Kompozitler, Sıcak Presleme, Mekanik Özellikler, Fiziksel Özellikler, |
| ANN, Cu-TiC Composites, Mechanical Properties, Physical Properties, Hot Pressing, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
Ti6Al4V ALAŞIMININ FİBER LAZER KAYNAK KABİLİYETİ
FIBER LASER WELDABILITY OF Ti6Al4V ALLOY |
| Titanyum, Ti6Al4V Alaşımı, Mikroyapı, Fiber Lazer Kaynak, Mekanik Özellikler, |
| Titanium, Ti6Al4V Alloy,, Microstructure, Fiber Laser Welding, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
|
STRUCTURAL AND ELECTRICAL PROPERTIES OF THE Ca(PO-4)2 COMPOUND
|
| Calcium compounds, Density functional theory, B3LYP hybrid function, Structural parameters, Electronic properties, |
|
Physical Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
TOZ METALURJİSİ İLE ÜRETİLEN Cu-FeB KOMPOZİT MALZEMELERİN MİKROYAPI VE ELEKTRİKSEL ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF MICROSTRUCTURE AND ELECTRICAL CHARACTERISTICS OF Cu-FeB COMPOSITE MATERIALS PRODUCED BY POWDER METALLURGY |
| Toz Metalurjisi, Metal Matrisli Kompozit, Elektriksel Özellikler,, Cu , FeB , |
| Powder Metallurgy , Metal Matrix Composite, Electrical Properties, Cu , FeB, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
LAZER KAYNAĞI İLE BİRLEŞTİRİLEN AISI 2205 DUBLEKS PASLANMAZ ÇELİĞİN MEKANİK VE MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF LASER BEAM WELDED AISI 2205 DUPLEX STAINLESS STEEL |
| Paslanmaz Çelik , AISI 2205, CO2 Lazer Kaynağı, Mekanik Özellikler, Mikroyapı, |
| Stainless Steel, AISI 2205, CO2 Laser Beam Welding, Mechanical Properties, Microstructure, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN CO2 LAZER IŞINI KAYNAK YÖNTEMİYLE KAYNAK KABİLİYETİNİN ARAŞTIRILMASI
AN INVESTIGATION OF CO2 LASER BEAM WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Lazer Kaynağı, Martenzitik Paslanmaz Çelik, Isıl İşlem, Mikroyapı, Mekanik Özellikler, |
| Laser Welding, Martensitic Stainless Steel, Heat Treatment, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
ROBOTİK MIG KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN 5754 ALÜMİNYUM ALAŞIMININ MEKANİK VE MİKROYAPI ÖZELLİKLERİNE KAYNAK HIZININ ETKİSİ
THE EFFECT OF WELDING SPEED ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF ROBOTIC GMAW WELDED 5754 AlUMINIUM ALLOY |
| Alüminyum ve Alaşımları, Robotik, MIG, Mikroyapı, Mekanik Özellikler., |
| Aluminium and Alloy, Robotic, MIG, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 1, Published Date : 1.01.2015 |
|
|
ISIL İŞLEM GÖRMÜŞ 30MnB5 ÇELİĞİNİN MEKANİK ÖZELLİKLERİNİN VE ÇENTİK DARBE GEÇİŞ SICAKLIĞININ İNCELENMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND TRANSITION TEMPERATURE OF TEMPERED 30MnB5 STEEL |
| 30MnB5, Isıl işlem, Mekanik özellikler, Dönüşüm sıcaklığı, Kırılma, |
| 30MnB5, Heat treatment, Mechanical properties, Transition temperature, Fracture, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 4, Published Date : 1.10.2014 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN SÜRTÜNME KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF JOINABILITY BY FRICTION WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Martenzitik paslanmaz çelik, AISI 420, Sürtünme Kaynağı, Mikroyapı, Mekanik Özellikler, |
| Martensitic stainless steel, AISI 420, Friction Welding, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
ÜSTYAPI PROJELERİNİN MALİYET TAHMİN ÇALIŞMALARINDA BELİRSİZLİKLERİN YAPAY ZEKA TEKNİKLERİYLE ANALİZİ
ANALYSIS OF UNCERTAINTIES FOR THE COST ESTIMATION OF BUILDING PROJECTS USING ARTIFICIAL INTELLIGENCE TECHNIQUES |
| Yapay Zeka Metotları, Proje Karakteristik Özellikleri, İnşaat Proje Yönetimi, Maliyet Tahmini, Proje Belirsizlikleri, |
| Artificial Intelligence Methods, Project Specific Properties, Construction Project Management, Cost Estimation, Project Uncertainties, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 2, Published Date : 1.04.2012 |
|
|
FİLLER OLARAK MERMER TOZU İÇEREN BETON ÖZELLİKLERİNİN BULANIK MANTIK KULLANILARAK BELİRLENMESİ
DETERMINATION OF PROPERTIES OF MARBLE DUST CONTAINING CONCRETE AS FILLER MATERIAL BY FUZZY LOGIC |
| Filler, Mermer tozu, Bulanık mantık, Taze beton özellikleri, Sertleşmiş beton özellikleri, |
| Filler, Marble dust, Fuzzy logic, Properties of fresh concrete, Properties of hardened concrete, |
|
Technological Applied Sciences, Year : 2012, Volume : 7, Issue : 2, Published Date : 1.04.2012 |
|
|
İLKÖĞRETİM DÜZEYİNDE MATEMATİK ÖĞRETİMİNİ DESTEKLEYİCİ E-ÖĞRENME PORTALLARININ KRİTİK ÖZELLİKLERİNİN BELİRLENMESİ
INVESTIGATING CRITICAL PROPERTIES OF E-LEARNING PORTALS THAT SUPPORT TEACHING MATHEMATICS AT ELEMENTARY LEVELS |
| İlköğretim, Matematik Öğretimi, Öğretmen Görüşleri, E- Öğrenme Portalları, Kritik Özellikler, |
| Elementary Education, Mathematics Teaching, Teachers’ Perception, E-Learning Portals, Critical Properties, |
|
Education Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
AĞIR AGREGALARIN RADYASYON ZIRHLAMA ÖZELLİKLERİ
RADIATION SHIELDING PROPERTIES OF HEAVY AGGREGATES |
|
Iskender AKKURT , Şemsettin KILIÇARSLAN , Celalettin BAŞYİĞİT, Betül MAVİ , Ayşe AKKAŞ , kadir günoglu |
| Ağır agrega, Radyasyon absorblama özellikleri, Gama spetrometresi, NaI(Tl), Beton, |
| Heavy aggregate, Radiation absorption properties, Gamma spectrometry, NaI(Tl), Concrete, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YÜKSEK FIRIN CÜRUFLU BETONLARIN RADYASYON SOĞURMA KARAKTERİSTİKLERİNİN BELİRLENMESİ
A TEST OF RADIATION ABSORPTION CHARACTERISTICS OF BLAST-FURNACE SLAG CONCRETE |
|
Celalettin BAŞYİĞİT, Iskender AKKURT , kadir günoglu , Ayşe AKKAŞ , Betül MAVİ |
| Yüksek fırın cürufu, Radyasyon soğurma özellikleri, Gama spetrometresi, NaI(Tl), Beton, |
| Blast furnace slag, Radiation absorption properties, Gamma ray spectrometry, NaI(Tl), Concrete, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
POLİPROPİLEN FİBER İÇEREN BETONLARININ ELASTİSİTE MODÜLÜNÜN BULANIK MANTIK KULLANILARAK BELİRLENMESİ
PREDICTION OF ELASTIC MODULUS OF POLYPROPYLENE FIBER CONTAINING CONCRETE BY FUZZY LOGIC |
| Beton, Plipropilen Fiber, Bulanık Mantık, Elastisite Modülü, Sertleşmiş özellikler, |
| Concrete, Polypropylene Fiber, Fuzzy Logic, Modulus of Elasticity, Hardened Properties, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ENJEKSİYONDA KALIPLANMIŞ PP VE PP KOMPOZİTİN BİRLEŞME İZİ ÖZELLİKLERİNİN İNCELENMESİ
THE EXAMINATION OF WELD LINE PROPERTIES IN INJECTION MOLDED PP AND PP COMPOSITES |
| PP, cam elyaf, aky? analizi, mekanik özellikler, birle?me izi, |
| PP, Glass fiber, Flow analysis, Mechanical properties, weld line, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
HAVLU KUMAŞLARDA HİDROFİLİTE, YUMUŞAKLIK VE MUKAVEMETİN OPTİMİZASYONU
THE OPTIMIZATION OF HYDROPHILITY, SOFTNESS AND STRENGTH OF TOWEL FABRICS |
| Optimizasyon, Havlu Kumaşlar, Performans Özellikleri, Fiziksel Özellikler, LINGO, |
| Optimization, Towel fabrics, Performance properties, Physical Properties, LINGO, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
TAZE BETONUN REOLOJİK ÖZELLİKLERİ ARASINDAKİ İLİŞKİNİN BULANIK MANTIK YÖNTEMİYLE İNCELENMESİ
INVESTIGATION OF RELATIONSHIP BETWEEN RHEOLOGICAL PROPERTIES OF FRESH CONCRETE BY FUZZY LOGIC |
| Taze beton, Reolojik özellikler, Bulanık mantık, Betonun Özellikleri, Beton, |
| Fresh concrete, Rheological properties, Fuzzy logic, concrete, concrete properties, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
ÇİMENTO SEKTÖRÜNDE ZETA POTANSİYEL
ZETA POTENTIAL IN CEMENT SECTOR |
| Zeta Potansiyel, Çimento, Yüzey Özellikleri, Mineral Katkılar, Kimyasal Katkılar, |
| Zeta Potential, Cement, Surface Properties, Mineral Additives, Chemical Additives, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
UÇUCU KÜL İKAMELİ BETONLARIN MÜHENDİSLİK ÖZELLİKLERİNİN TAHRİBATSIZ TEST YÖNTEMLERİ İLE BELİRLENMESİ
INVESTIGATION OF ENGINEERING PROPERTIES OF FLY ASH SUBSTITUTED CONCRETE WITH NON-DESTDUCTIVE TESTING METHODS |
|
Mehmet EMIROGLU , Serkan SUBASI , Mürsel ERDAL , Hakan BOLAT , Mustafa ÇULLU |
| Beton, Uçucu kül, Tahribatsız test yöntemleri, Mühendislik özellikleri, Basınç dayanımı, |
| Concrete, Fly ash, Non-destructive test methods, Engineering properties, Compressive strength, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
KAĞIT ENDÜSTRİSİNDE BENTONİT İLE BİRLİKTE KULLANILAN POLİMERLERİN TUTUNMA VE KAĞIT ÖZELLİKLERİ ÜZERİNE ETKİSİ
THE EFFECT OF POLYMERS USED WITH BENTONITE IN PAPER INDUSTRY ON RETENTION AND PAPER PROPERTIES |
| Tutunma, Bentonit, Polimer, Kağıt, Fiziksel ve Optik Özellikler, |
| Retention, Bentonite, Polymer, Paper, Physical and Optical Properties, |
|
Ecological Life Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
PUZOLAN YÜZEY ÖZELLİKLERİNİN ÇİMENTO HARÇLARININ FİZİKSEL VE MEKANİK ÖZELLİKLERİNE ETKİSİ
THE EFFECT OF POZZOLAN SURFACE PROPERTIES ON PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT MORTARS |
| Çimento, Puzolan, Yüzey özellikleri, Mineroloji, Zeta potansiyel, |
| Cement, Pozzolan, Surface properties, Mineralogy,, Zeta potential, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
TOZALTI ARK KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI KALINLIKTAKİ GRADE A GEMİ SACLARININ MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE MECHANICAL PROPERTIES OF DIFFERENT THICKNESS OF THE GRADE A SHIP PLATES JOINED BY SUBMERGED ARC WELDING |
|
Behçet GULENC , Nizamettin KAHRAMAN , Yakup KAYA, Ahmet DURGUTLU |
| Gemi sacı, Tozaltı ark kaynağı, Mekanik özellikler, Mikroyapı, Sertlik, |
| Ship plate, submerged arc welding, mechanical properties, microstructure, hardness, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
ISIL IŞLEM UYGULANMIŞ D-VTKA TUTKALI ILE YAPIŞTIRILMIŞ SARIÇAM (Pinus Slyvestrist L.) ODUNUN YAPIŞMA VE BASINÇ DIRENCI
COMPRESSION AND BONDING STRENGTH OF HEAT TREATED SCOTCH PINE (Pinus Slyvestrist L.) WOOD BONDED WITH D-VTKA ADHESIVE |
| Yapışma Direnci, Basınç Direnci, Isıl İşlem, Sarıçam (Pinus slyvetsris L.), Mekanik Özelikler, |
| Bonding Strength, Compression Strength, Heat Treatment, Scotch Pine (Pinus slyvetsris L.), Mechanical Properties, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
TRASIN ÇİMENTO YÜZEY ÖZELLİĞİNE, HİDRATASYONA VE BASINÇ DAYANIMINA ETKİSİ
THE EFFECT OF TRASS ON THE CEMENT SURFACE PROPERTIES, HYDRATION AND COMPRESSIVE STRENGTH |
| Çimento, Hidratasyon, Mineroloji,, Tras, Yüzey Özellikleri, |
| Cement, Hydration, Mineralogy, Trass, Surface Properties, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
PA 6 PLASTİK MALZEMESİNİN AKIŞ ÖZELLİKLERİNİN BASINÇ VE SICAKLIK DEĞİŞİMİNE BAĞLI OLARAK BELİRLENMESİ
DETERMINATION OF THE RHEOLOGICAL PROPERTIES OF PA 6 PLASTIC MATERIAL ACCORDING TO THE PRESSURE AND TEMPERATURE |
| Takviyelendirilmiş polyamid 6, Cam elyaf, Akış özellikleri, Ergiyik akış indisi, Termoplastik malzemeler, |
| Reinforced polyamid 6, Glass fiber, Rheological properties, Melt flow index, Thermoplastics materials, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE SERAMİK TAKVİYELİ ALÜMİNYUM KOMPOZİT MALZEMELERİN ÜRETİMİ VE ÖZELLİKLERİNİN INCELENMESI
PRODUCTION OF CERAMIC REINFORCED ALUMINUM COMPOSITE MATERIALS BY USING POWDER METALLURGY METHOD AND DETERMINATION OF ITS PROPERTIES |
| Al-SiC kompozit, Al-FeBx Kompozit, Toz Metalurjisi, Mekanik Özellikler, Metalurji, |
| Al-SiC Composite, Al-FeBx Composite, Powder Metallurgy, Mechanical Properties, Metallurgy, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
ORTAM SICAKLIĞINDAKİ DEĞİŞİMİN BETONUN MEKANİK ÖZELLİKLERİNE ETKİSİ
EFFECT OF CHANGE AT THE AMBIENT TEMPERATURE ON MECHANICAL PROPERTIES OF CONCRETE |
| Beton, Ortam Sıcaklığı, Mekanik Özellikler, Basınç Dayanımı, Çekme Dayanımı, |
| Concrete, Ambient Temperature, Mechanical Properties, Compressive Strength, Tensile Strength, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
SU/ÇİMENTO (S/Ç) ORANININ AĞIR BETONLARIN FİZİKSEL VE MEKANİK ÖZELLİKLERİNE ETKİSİ
THE EFFECT OF WATER-TO-CEMENT (W/C) RATIO ON THE PHYSICAL AND MECHANICAL PROPERTIES OF HEAVYWEIGHT CONCRETES |
| Ağır Beton, S/Ç, Fiziksel Özellikler, Mekanik Özellikler, Beton, |
| Heavy concrete, W/C, Physical Properties, Mechanical Properties, Concrete , |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
TÜRKİYENİN GÜNEYDOĞU ANADOLU BÖLGESİNDEKİ BAZALT TAŞLARININ FİZİKSEL ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF PHYSICAL PROPERTIES OF BASALT STONES IN THE SOUTHEAST ANATOLIAN REGION OF TURKEY |
| Bazalt Taşı, Fiziksel Özellikler, Don Kaybı, Yoğunluk Deneyi, Su Emme, |
| Basalt Stone, Physical Properties,, Physical Properties, Freeze Loss, Density Test, Water Absorption, |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
SOĞUK PRESLEME YÖNTEMİYLE ÜRETİLMİŞ Ni-Ti-Cu KOMPOZİTLERİN TLP DİFÜZYON KAYNAĞINDA SICAKLIĞIN BİRLEŞME ÜZERİNDEKİ ETKİSİNİN İNCELENMESİ
THE EFFECT OF TEMPERATURES ON THE TLP DIFFUSION BONDING OF Ni-Ti-Cu COMPOSITES MANUFACTURED BY COLD PRESSING METHOD |
| Ni-Ti-Cu,, Toz Metalurjisi,, Soğuk Presleme,, TLP Difüzyon Kaynağı,, Mekanik Özellikler., |
| Ni-Ti-Cu,, Powder Metallurgy,, Cold Pressing,, TLP Diffusion Bonding,, Mechanical Properties., |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|