+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
OLİVİN İKAMELİ BETONLARIN YÜKSEK SICAKLIK SONRASI DEĞERLENDİRMESİ
EVALUATION OF OLIVINE SUBSTITUTED CONCRETES AFTER HIGH TEMPERATURE |
| Olivin Atığı, Basınç Dayanımı, Yüksek Sıcaklık, Mikroyapı, Beton, |
| Olivine Waste, Compressive Strength, High Temperature, Microstructure, Concrete, |
|
Engineering Sciences, Year : 2024, Volume : 19, Issue : 3, Published Date : 1.07.2024 |
|
|
FİZİKSEL RİSK ETMENLERİ VE ERGONOMİK AÇIDAN KAMU VE ÖZEL LİSELERİN KARŞILAŞTIRILMASI
COMPARISON OF PUBLIC AND PRIVATE HIGH SCHOOLS IN PHYSICAL RISK FACTORS AND ERGONOMICS |
| Liselerde Ergonomi, Aydınlık Düzeyi, Okulda Gürültü, Okulda Ses Yalıtımı, Eğitim Yapıları, |
| Ergonomics in High Schools, Luminous Level, Noise in School, Sound Insulation at School, Educational Structures, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
BETONARME YAPILARDA YAPISAL VE YAPISAL OLMAYAN HASARLAR VE HASAR TESPİTİ ÜZERİNE BİR ARAŞTIRMA
A RESEARCH ON STRUCTURAL AND NON-STRUCTURAL DAMAGES AND DAMAGE ASSESSMENT IN REINFORCED CONCRETE STRUCTURES |
| Deprem, Hasar Tespiti, Yapısal Hasarlar, Yapısal Olmayan Hasarlar, Biyoharmoloji, |
| Earthquake, Damage Assessment, Structural Damages, Non-Structural Damages, Bioharmology, |
|
Engineering Sciences, Year : 2023, Volume : 18, Issue : 2, Published Date : 1.04.2023 |
|
|
AISI 2205 VE AISI 8640 ÇELİK ÇİFTİNİN SÜRTÜNME SAPLAMA KAYNAĞI İLE KAYNAK EDİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF THE WELDABILITY OF AISI 2205 AND AISI 8640 STEEL COUPLE BY FRICTION STUD WELDING |
| Dubleks Paslanmaz Çelik, , Mikroyapı, AISI 8640, Sürtünme Saplama Kaynağı , AISI 2205, |
| Duplex Stainless Steel, Microstructure, AISI 8640, Friction Stud Welding, AISI 2205, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 2, Published Date : 1.04.2023 |
|
|
SÜRTÜNME SAPLAMA KAYNAĞI İLE BİRLEŞTİRİLEN DUBLEKS PASLANMAZ ÇELİĞİ VE ISLAH ÇELİKLERİNİN MİKROYAPI İNCELEMESİ
MICROSTRUCTURAL INVESTIGATION OF DUPLEX STAINLESS STEEL AND TEMPERED STEELS COMBINED BY FRICTION STUD WELDING |
| Mikroyapı, Mikrosertlik , Sürtünme Saplama Kaynağı, Dubleks Paslanmaz Çelik, Islah Çeliği, |
| Microstructure, Microhardness, Friction Stud Welding, Duplex Stainless Steel, Tempered Steel, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 1, Published Date : 1.01.2023 |
|
|
DİKENLİ TATLISU YILAN BALIĞI (Mastacembalus mastacembalus, Bank ve Solander, 1794)’IN SOLUNGAÇLARININ HİSTOLOJİK YAPISI VE BAZI HİSTOKİMYASAL ÖZELLİKLERİ
INVESTIGATION OF HISTOLOGY STRUCTURE AND SOME HISTOCHEMICAL CHARACTERISTICS OF GILLS IN THE SPINY EEL, (Mastacembalus mastacembalus, Bank and Bolander, 1794) |
| Mastacembalus mastacembalus, Solungaç, Histoloji, Yapı, Histokimya, |
| Mastacembalus mastacembalus, Gill, Histology, Structure, Histochemistry, |
|
Ecological Life Sciences, Year : 2022, Volume : 17, Issue : 4, Published Date : 1.10.2022 |
|
|
Ti6Al4V TİTANYUM ALAŞIMI İLE AISI 304 PASLANMAZ ÇELİĞİNİN DİFÜZYON KAYNAĞI İLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
INVESTIGATION OF JOINABILITY OF TI6AL4V TITANIUM ALLOY AND AISI 304 STAINLESS STEEL BY DIFFUSION WELDING |
| Difüzyon Kaynağı, Ti6Al4V Titanyum Alaşımı, AISI 304 Paslanmaz Çelik, Mikroyapı, Mikrosertlik, |
| Diffusion Welding, Ti6Al4V Titanium Alloy, AISI 304 Stainless Steel, Mikrostructure, Mikrohardness, |
|
Technological Applied Sciences, Year : 2022, Volume : 17, Issue : 3, Published Date : 1.07.2022 |
|
|
ÇOK KATMANLI KARBON NANOTÜP TAKVİYELİ ALÜMİNYUM ESASLI KOMPOZİTLERİN MEKANİK ÖZELLİK VE MİKROYAPI İNCELEMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALUMINUM BASED COMPOSITES REINFORCED WITH MULTI-WALLED CARBON NANOTUBES |
| Karbon Nanotüp, Alüminyum, Kompozit, Toz Metalürjisi, Mikroyapı, |
| Carbon Nanotube, Aluminum, Composite, Powder Metallurgy, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 1, Published Date : 1.01.2021 |
|
|
VALERY HEGARTY ENSTALASYONLARINDA KÜLTÜREL BELLEĞİN YAPISÖKÜMÜ
DECONSTRUCTION OF CULTURAL MEMORY IN VALERY HEGARTY'S INSTALATIONS |
| Kültürel Bellek, Enstalasyon, Yapısöküm, Amerikan Kültürü, Çağdaş Sanat, |
| Cultural Memory, Installation, Deconstruction, American Culture, Contemporary Art, |
|
Fine Arts, Year : 2020, Volume : 15, Issue : 4, Published Date : 1.10.2020 |
|
|
PASLANMAZ ÇELİK İLE DÜŞÜK KARBONLU ÇELİK MALZEMELERİN MIG KAYNAK YÖNTEMİYLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
AN INVESTIGATION OF JOINABILITY OF STAINLESS STEEL AND THE LOW CARBON STEEL MATERIALS BY MIG WELDING METHOD |
|
Yakup KAYA, GÖKHAN ÇAYIRHAN, Mehmet BÖKÜ, Nizamettin KAHRAMAN |
| MIG Kaynağı, Paslanmaz Çelik, Düşük Karbonlu Çelik, Mekanik Özellikle, Mikroyapı, |
| MIG welding, Stainless Steel, Low Carbon Steel, Mechanical Properties, Microstructure, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
İÇ MİMARLIKTA YAPAY ZEKÂ UYGULAMALARININ TASARIM SÜRECİNE FAYDALARININ DEĞERLENDİRİLMESİ
EVALUATION OF THE BENEFITS OF ARTIFICIAL INTELLIGENCE APPLICATIONS TO THE DESIGN PROCESS IN INTERIOR ARCHITECTURE |
| Yapay Zekâ, Tasarım ve Teknoloji, Mekân Tasarımı, İç Mimari, Tasarım Süreci, |
| Artificial Intelligence, Design and Technology, Space Design, Interior Architecture, Design Process, |
|
Humanities Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
BAZI TAŞIYICI YAPI ELEMANLARIN TASARIMINDA MİMARLARDAN KAYNAKLANAN FARKLILIKLARIN İSTATİSTİKSEL ANALİZİ, BOLU ÖRNEĞİ
STATISTICAL ANALYSIS OF DIFFERENCES ARISING FROM ARCHITECTS IN SOME STRUCTURAL DESIGN, BOLU SAMPLIN |
| İnşaat Mühendisliği, Yapı Elemanları, Projelendirme Sorunları, İstatistik, Taşıyıcı Yapı Elemanları, |
| Civil Engineering, Structural Elements, Project Design Problems, Statistics, Carrier Building Elements, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
HAZAR GÖLÜ (ELAZIĞ/TÜRKİYE) BALIKÇILARININ SOSYO-EKONOMİK VE SOSYO-DEMOGRAFİK YAPISI
THE STRUCTURE OF SOCIO-ECONOMIC AND SOCIO-DEMOGRAPHIC OF FISHERMEN IN LAKE HAZAR (ELAZIG-TURKEY) |
| Balıkçı, Sosyo-Ekonomik Yapı, Hazar Gölü, Elazığ, Sosyo-Demografik Yapı, |
| Socio-economic Structure, Fishermen, Lake Hazar, Elazığ, Socio-Demographical Structure, |
|
Ecological Life Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
BAZI TAŞIYICI YAPI ELEMANLARIN TASARIMINDA İNŞAAT MÜHENDİSLERİNDEN KAYNAKLANAN FARKLILIKLARIN İSTATİSTİKSEL ANALİZİ, BOLU ÖRNEĞİ
STATISTICAL ANALYSIS OF DIFFERENCES ARISING FROM CIVIL ENGINEERING IN SOME STRUCTURAL DESIGN, BOLU SAMPLING |
| Mimarlık, Yapı Elemanları, İstatistik, Bolu, Projelendirme Sorunları, |
| Architecture, Structural Elements, Statistics, Bolu, Project Design Problems, |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
SAVUNMA VE SIĞINMA YAPILARINDA KBRN TEHDİTLERİNE KARŞI BETONLARIN ZIRHLANMASI
ARMORING OF CONCRETE AGAINST KBRN THREATS IN DEFENSE AND REFUGE BUILDINGS |
| Beton, Savunma Yapıları, Sığınma Yapıları, Nükleer ve Radyoaktif Tehlikeler, Betonun Zırhlanması, |
| Concrete, Defense Buildings , Refuge Building (Bunker), Nuclear and Radioactive Hazards, Armoring of Concrete , |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 3, Published Date : 1.07.2019 |
|
|
LSTM DERİN SİNİR AĞLARI İLE ÜNİVERSİTE GİRİŞ SINAVINDAKİ MATEMATİK SORU SAYILARININ KONULARA GÖRE TAHMİNİ
PREDICTION OF NUMBERS QUESTION MATHEMATICS IN THE UNIVERSITY ENTRANCE EXAM BY TOPICS WITH LSTM-BASED DEEP NEURAL NETWORK |
| Derin Sinir Ağı, LSTM, Tahmin, Time Series Model, Yapay Zeka, |
| LSTM, Prediction, Deep Neural Network, Time Series Model, Yapay Zeka, |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 3, Published Date : 1.07.2019 |
|
|
SICAK DÖVME SONRASI KUMDA VE HAVADA SOĞUTULAN ÇELİKLERİN KESME KUVVETLERİ VE YÜZEY PÜRÜZLÜLÜK DEĞERLERİNİN İNCELENMESİ
THE INVESTIGATION OF SURFACE ROUGHNESS AND CUTTING FORCES OF STEELS COOLED IN SAND AND AIR AFTER HOT FORGING |
| Sıcak Dövme, Mikroyapı, İşlenebilirlik, Çelik, , Karbür, |
| Hot Forging, Microstructure, Machinability, Steel, Carbide, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 2, Published Date : 1.04.2019 |
|
|
HASSAS DÖKÜM YÖNTEMİ İLE ÜRETİLEN ALAŞIMLARIN MİKROYAPI VE SERTLİK ÖZELLİKLERİNİN ARAŞTIRILMASI
THE INVESTIGATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF ALLOYS PRODUCED BY INVESTMENT CASTING METHOD |
| Hassas Döküm, Mikroyapı, Sertlik, Alaşım, Metal, |
| Investment Casting, Microstructure, Hardness, Alloy, Metal, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
TRIP VE DP ÇELİKLERİNDE DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN MEKANİK ÖZELLİKLERE ETKİSİ
EFFECT OF THE RESISTANCE SPOT WELDING PARAMETERS IN TRIP AND DP STEELS ON MECHANICAL PROPERTIES |
| DP ve TRIP çelikleri, Direnç Nokta Kaynağı, Gelişmiş Yüksek Mukavemetli Çelikler, Mikroyapı, Mekanik Özellikler, |
| DP and TRIP Steels, Resistance Spot Welding, Advanced High Strength Steel (AHSS), Microstructure, Mechanical Properties, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
ELEKTRİK TESİSAT VE KOMPANZASYON MODÜLER EĞİTİM SETİ TASARIMI VE UYGULAMASI
DESIGN AND APPLICATION OF ELECTRICITY INSTALLATION AND COMPENSATION MODULAR TRAINING SETS |
| Mesleki ve Teknik Eğitim, Elektrik Eğitimi, Elektrik tesisatı, Kompanzasyon, Modüler Yapılar, |
| Vocational and Technical Education, Education onElectricity, Electrical Installation, Compensation, Modular Structures, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
ÜÇ BOYUTLU ZEMİN-YAPI SİSTEMLERİNDE AKTİF YÖNTEMLERLE TİTREŞİM İZOLASYONU SAĞLANABİLİRLİĞİNİN ARAŞTIRILMASI
THE INVESTIGATION OF VIBRATION ISOLATION IN THREE DIMENSIONAL SOIL-STRUCTURE SYSTEMS BY ACTIVE METHODS |
| Titreşim Yalıtımı , Zemin-Yapı Etkileşimi, Sonlu Elemanlar, Geçirgen Sınırlar, Çukur Geometrisi , |
| Vibration Isolation, Soil-Structure Interaction, Finite Elements, Transparent Boundaries, Geometry of Trench , |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
ISIL İŞLEM UYGULANMIŞ ORTA KARBONLU ÇELİKTE MİKROYAPI DEĞİŞİMİNİN BULANIK MANTIK İLE TAHMİN EDİLMESİ
ESTIMATION WITH FUZZY LOGIC OF THE MICROSTRUCTURE CHANGE IN HEAT TREATED MEDIUM CARBON STEEL |
| Isıl işlem, Mikroyapı, Bulanık Mantık, Orta Karbonlu Çelik, Mamdani Yöntemi, |
| Heat treatment, Microstructure, Fuzzy logic, Medium Carbon Steel, Mamdani method , |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 4, Published Date : 1.10.2017 |
|
|
BEDENSEL ENGELLİLER AÇISINDAN BİR EĞİTİM KURUMUNUN ULAŞILABİLİRLİK VE KULLANILABİLİRLİĞİNİN İNCELENMESİ
EXAMINATION OF THE ACCESSIBILITY AND THE AVAILABILITY OF AN EDUCATIONAL INSTITUTION IN TERMS OF PHYSICAL DISABILITIES |
| Biyoharmoloji, Mekansal Kriterler, Engell Bireyler, Eğitim Yapıları, Bedensel Engelliler , |
| Bioharmology, Spatially Criteria, Individuals with Disabilities, Educational Structures, Physical Disabilities, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
Ti6Al4V ALAŞIMININ FİBER LAZER KAYNAK KABİLİYETİ
FIBER LASER WELDABILITY OF Ti6Al4V ALLOY |
| Titanyum, Ti6Al4V Alaşımı, Mikroyapı, Fiber Lazer Kaynak, Mekanik Özellikler, |
| Titanium, Ti6Al4V Alloy,, Microstructure, Fiber Laser Welding, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
METEOROLOJİK VERİLER KULLANILARAK KASTAMONU İLİ GÜNEŞLENME ŞİDDETİNİN YAPAY SİNİR AĞLARI İLE TAHMİNİ
ARTIFICIAL NEURAL NETWORK BASED PREDICTION OF INTENSITY OF INSOLATION IN THE CITY OF KASTAMONU USING METEOROLOGICAL DATA |
| Yapay Sinir Ağları, Güneş Işınım Şiddeti, Güneş Enerjisi, Meteoroloji,, Nispi Nem, |
| Artificial Neural Networks, Intensity of Solar Radiation, Solar Power, Meteorology, Relative Humidity, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
YAPAY AĞIZ SIVISINDA TERMAL ÇEVRİMİN KOMPOZİT RESTORATİF MALZEMELERİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNDEKİ ETKİSİ
EFFECT OF THERMAL CYCLING ON SURFACE OF ROUGHNESS COMPOSITE RESTORATIVE MATERIALS IN ARTIFICAL SALIVA |
| Restoratif Kompozit Malzeme, Termal Çevrim, Yüzey Pürüzlülüğü, Yapay Tükürük Sıvısı, SEM, |
| Composite Restorative Material, Thermal Cycle, Surface of Roughness, Artificial Saliva, SEM, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
ZİRKONYA TAKVİYELİ HİDROKSİAPATİT (HA) BAZLI BİYOAKTİF HİBRİD KAPLAMALARIN KOROZYON DUYARLILIKLARI
CORROSION SUSCEPTIBILITIES OF HYDROXYAPATİTE (HA) BASED ZIRCONIA REINFORCED BIOACTIVE HYBRID COATINGS |
|
Mehmet TOPUZ, Burak DİKİCİ, Serap KOÇ, HAKAN YILMAZER, MITSUO NİİNOMİ, MASAKI NAKAİ |
| CP Ti, Hidroksiapatit, In-vitro Test, Korozyon, Ringer Çözeltisi, |
| CP Ti, Hydroxyapatite, In-vitro Test, Corrosion, Ringer Solution, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
FARKLI KUYRUK MODELLERİNE SAHİP BİR ROBOT BALIĞIN FSI ANALİZİ
FSI ANALYSIS OF A ROBOT FISH WITH DIFFERENT TAIL MODELS |
|
MUSTAFA AY, GONCA ÖZMEN KOCA, Seda YETKİN, Cafer Bal , Z.Hakan Akpolat |
| Robot Balık, Carangiform Yüzüş Modu, Akışkan-Yapı Analizi (FSI),, Hesaplamalı Akışkanlar Dinamiği (HAD), ANSYS, |
| Robotic Fish, Carangiform Swimming Mode, Fluid Structure Analysis (FSI), Computational Fluid Dynamics(CFD), ANSYS, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
POLİVİNİLASETAT TUTKALI İLE YAPIŞTIRILMIŞ DOĞU KAYINI (Fagus orientalis Lipsky) VE DOĞU LADİNİ (Picea orientalis (L.) Link.) ODUNLARININ YAPIŞMA PERFORMANSI ÜZERİNE SUDA BEKLETME FAKTÖRLERİNİN ETKİLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECTS OF SOAKING FACTORS ON THE BONDING PERFORMANCE OF ORIENTAL BEECH (Fagus orientalis Lipsky) AND ORIENTAL SPRUCE (Picea orientalis (L.) Link.) WOODS BONDED WITH POLYVINYL ACETATE |
|
Selahattin BARDAK, SEBAHATTIN TIRYAKI, TIMUÇIN BARDAK, AYTAÇ AYDIN |
| PVAc, Yapışma Performansı, Su Sıcaklığı, Doğu Kayını, Doğu Ladini, |
| PVA, Adhesion Performance, Water Temperature, Oriental Beech, Orieantal Spruce , |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
1260-61/1844-45 TEMETTUAT KAYITLARI IŞIĞINDA KARACALI VE EYNE GAZİLÜ KÖYLERİNİN SOSYAL VE EKONOMİK GÖRÜNTÜSÜ
SOCIAL AND ECONOMIC FEATURES OF KARACALI AND EYNE GAZILÜ VILLAGES IN THE CONSIDERATION OF 1260-61/1844 TEMETTUAT REGISTERS |
| Temettüat Defteri, Hane, Vergi, Karye, Sosyal Yapı, |
| Temettuat Registers, Section, Tax, Village, Social Structure, |
|
Humanities Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
YENİ MEDYA ORTAMININ YENİ KAMUSAL ALAN OLARAK KULLANIMI ÜZERİNE BİR DEĞERLENDİRME
AN ASSESSMENT ON THE USAGE OF NEW MEDIA AS A NEW PUBLIC SPHERE |
| Yeni Medya, Yeni Kamusal Alan, Eşitsiz Güç İlişkileri, Ağ Yapılanması, Ağın Denetim, |
| New Media, New Public Sphere, Unequal Power Relations, Network Structuring, Surveillance of Network, |
|
Humanities Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
LAZER KAYNAĞI İLE BİRLEŞTİRİLEN AISI 2205 DUBLEKS PASLANMAZ ÇELİĞİN MEKANİK VE MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF LASER BEAM WELDED AISI 2205 DUPLEX STAINLESS STEEL |
| Paslanmaz Çelik , AISI 2205, CO2 Lazer Kaynağı, Mekanik Özellikler, Mikroyapı, |
| Stainless Steel, AISI 2205, CO2 Laser Beam Welding, Mechanical Properties, Microstructure, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
RÜZGAR TÜRBİN MODELLERİ KULLANARAK KASTAMONU İLİ RÜZGAR İLE ELEKTRİK ÜRETİM POTANSİYELİ TAHMİNİ
WIND ENERGY POTENTIAL ESTIMATION VIA ARTIFICIAL NEURAL NETWORKS |
| Yapay Sinir Ağları, Rüzgâr, Rüzgâr Türbinleri, Rüzgâr Enerji Potansiyeli, Enerji, |
| Artificial Neural Networks, Adaptive Neuro-Fuzzy , Inference System, Wind Turbines, Wind Power Potential , |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 3, Published Date : 1.07.2016 |
|
|
TRD YÖNTEMİYLE SUPAP ÇELİĞİ YÜZEYİNDE ÜRETİLEN KAPLAMALARIN MİKROYAPI VE AŞINMA ÖZELLİKLERİ
MICROSTRUCTURE AND WEAR PROPERTIES OF COATINGS ON VALVE STEEL PRODUCED BY TRD METHOD |
|
Serkan ISLAK, Cihan ÖZORAK, Cihangir Tevfik SEZGİN, Mehmet AKKAŞ |
| TRD, Kaplama, Supap, Mikroyapı, Aşınma, |
| TRD, Coating, Valve, Microstructure, Wear, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 3, Published Date : 1.07.2016 |
|
|
ÖĞRETMEN ADAYLARININ YAPILANDIRMACI ÖĞRENME KURAMINA İLİŞKİN BİLİŞSEL FARKINDALIK DÜZEYLERİ (GAZİ ÜNİVERSİTESİ ÖRNEĞİ)
COGNITIVE AWARENESS LEVELS OF TEACHER CANDIDATES TOWARDS CONSTRUCTIVIST LEARNING THEORY (THE CASE OF GAZI UNIVERSITY) |
| Yapılandırmacılık, Bilişsel Farkındalık, Öğretme, Öğretmen Adayı, Pedagojik Formasyon, |
| Constructivism, Metacognition, Teacher, Teacher Candidate,, Pedagojic Formation, |
|
Education Sciences, Year : 2016, Volume : 11, Issue : 2, Published Date : 1.03.2016 |
|
|
KÜRESELLEŞTİRME ISIL İŞLEMİ UYGULANMIŞ AISI 1050 ÇELİĞİN TORNALANMASINDA ESAS KESME KUVVETLERİNİN YAPAY SİNİR AĞLARI İLE MODELLENMESİ
MODELLING OF MAIN CUTTING FORCES WITH ARTIFICIAL NEURAL NETWORK IN TURNING OF SPHEROIDIZING HEAT TREATMENTED AISI 1050 STEEL |
| Küreselleştirme Isıl İşlemi, Esas Kesme Kuvvetleri, Yapay Sinir Ağları, AISI 1050 Çeliği, Modelleme, |
| Spheroidizing Heat Treatment, Main Cutting Forces, Artificial Neural Network, AISI 1050 Steel, Modelling, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 1, Published Date : 1.01.2016 |
|
|
YAPI PROJELERİNDE STRATEJİK İŞBİRLİKLERİNİ GELİŞTİRMEK İÇİN ULUSLARARASI ORTAKLIKLAR ÜZERİNE BİR ANALİZ: ULAŞIM PROJELERİ ÖRNEĞİ
AN ANALYSIS ON INTERNATIONAL PARTNERSHIPS FOR DEVELOPING STRATEGIC COLLABORATIONS IN CONSTRUCTION PROJECTS: A CASE STUDY ON TRANSPORTATION PROJECTS |
| Uluslararası Yapı Ortak Girişimleri, Ulaşım Projeleri,, Uluslararası Ulaşım Projesi Ortaklıkları, Proje Yönetimi, Yapı Projeleri, |
| International Construction Joint-Ventures, Transportation Projects, International Transportation Project Partnerships, Project management, Construction Projects, |
|
Engineering Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
TÜKETİCİ YENİLİKÇİLİĞİ VE MODA YENİLİKÇİLİĞİ İLİŞKİSİNİN İNCELENMESİ
AN EXAMINATION OF THE RELATIONSHIP BETWEEN CONSUMER INNOVATIVENESS AND FASHION INNOVATIVENESS |
| Tüketici Yenilikçiliği, Moda Yenilikçiliği, Kişisel Özellikler,, Öğrenci,, Yapısal Eşitlik Modellemesi, |
| Consumer Innovation, Fashion Innovation, Personality Traits, Students, Structural Equation Modeling, |
|
Social Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN CO2 LAZER IŞINI KAYNAK YÖNTEMİYLE KAYNAK KABİLİYETİNİN ARAŞTIRILMASI
AN INVESTIGATION OF CO2 LASER BEAM WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Lazer Kaynağı, Martenzitik Paslanmaz Çelik, Isıl İşlem, Mikroyapı, Mekanik Özellikler, |
| Laser Welding, Martensitic Stainless Steel, Heat Treatment, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
ROBOTİK MIG KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN 5754 ALÜMİNYUM ALAŞIMININ MEKANİK VE MİKROYAPI ÖZELLİKLERİNE KAYNAK HIZININ ETKİSİ
THE EFFECT OF WELDING SPEED ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF ROBOTIC GMAW WELDED 5754 AlUMINIUM ALLOY |
| Alüminyum ve Alaşımları, Robotik, MIG, Mikroyapı, Mekanik Özellikler., |
| Aluminium and Alloy, Robotic, MIG, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 1, Published Date : 1.01.2015 |
|
|
YAPILARDA İNSAN SAĞLIĞINI OLUMSUZ ETKİLEYEN KÜF MANTARI SORUNU
MOLD FORMATION PROBLEM THAT IS THREATING HUMAN HEALTH IN STRUCTURES |
| Yapı Hasarı, Yapı Fiziği, Su ve Nem Hasarları, Küf Mantarı Oluşumu, Küf Mantarı Konservasyonu, |
| Building Damage, Building Dhysics, Water and Moisture Damage, Mold Mormation, Mold Formation Conservation, |
|
Engineering Sciences, Year : 2014, Volume : 9, Issue : 4, Published Date : 1.10.2014 |
|
|
MADDENİN PARÇACIKLI YAPISI İLE İLGİLİ KAVRAM YANILGILARININ GİDERİLMESİNDE MODELE DAYALI AKTİVİTELERİN ETKİSİ
THE EFFECTS OF THE MODEL BASED ACTIVITIES ON OVERCOMING THE MISCONCEPTIONS REGARDING THE PARTICULATE NATURED STRUCTURE OF THE MATTER |
| Modele Dayalı Aktiviteler, Kavram Yanılgısı, Maddenin Parçacıklı Yapısı, İlköğretim Öğrencileri, Fen Eğitimi, |
| Model Based Activities, Misconceptions, The Particulate Nature of Matter, Primary School Students, Science Education, |
|
Education Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN SÜRTÜNME KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF JOINABILITY BY FRICTION WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Martenzitik paslanmaz çelik, AISI 420, Sürtünme Kaynağı, Mikroyapı, Mekanik Özellikler, |
| Martensitic stainless steel, AISI 420, Friction Welding, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
5E MODELİNİN ´MÜZİKSEL ALGI VE BİLGİLENME` ALANINDA AKADEMİK BAŞARI VE KALICILIĞA ETKİSİ
THE IMPACT OF THE 5E MODEL ON THE ACADEMIC SUCCESS AND RETENTION IN THE FIELD OF ´MUSICAL PERCEPTION AND INFORMATION` |
| Müzik Eğitimi, Müziksel Kavramlar, Müziksel Algı, 5E Modeli, Yapılandırmacı Öğrenme Yaklaşımı, |
| Music Education, Musical Concepts, Musical Perception, 5E Model, Constructive Learning Approach, |
|
Education Sciences, Year : 2014, Volume : 9, Issue : 2, Published Date : 1.04.2014 |
|
|
ENERJİ ETKİN BİNA TASARIM YAKLAŞIMI OLARAK AKILLI CEPHELER
INTELLIGENT FACADES AS AN ENERGY-EFFICIENT BUILDING DESIGN APPROACH |
| Akıllı cepheler, Mimarlık, Teknoloji, Enerji Etkin Yapı Kabuğu, Yenilenebilir Enerji Kaynakları, |
| Intelligent facades, Architecture, Technology, Energy-Efficient Building Skin, Renewable Energy Sources, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 3, Published Date : 1.07.2013 |
|
|
YAPILANDIRMACI ÖĞRENME KURAMINA İLİŞKİN BİLİŞSEL FARKINDALIK ÖLÇEĞİ GELİŞTİRME ÇALIŞMASI: BİR ÖLÇEK REVİZYONU
STUDY ON SCALE DEVELOPMENT METACOGNITION ABOUT CONSTRUCTIVIST LEARNING THEORY: REVISION OF A SCALE |
| Yapılandırmacı Öğrenme Kuramı, Bilişsel Farkındalık, Ölçek Geliştirme, Ölçek Revizyonu, Öğretmen ve Öğretmen Adayı, |
| Constructivist Learning Theory, Metacognition, Scale Development, Scale Revision, Teacher and Teacher Candidate, |
|
Education Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
ÖĞRENCİ KONTROL STRATEJİSİNE YÖNELİK ÖĞRETMEN TUTUMLARI
THE TEACHER ATTIUDES TOWARD THE LEARNER CONTROL STRATEGY |
| Yapısalcılık, Ayrıntılama Kuramı, Öğretim Stratejileri, Öğrenci Kontrol Stratejisi, Öğrenme Stratejileri, |
| Constructivism, Elaboration Theory, Instructional Strategies, Learner Control Strategy, Learning Strategies, |
|
Education Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
TÜRKİYE`DEKİ KAMU İHALELERİNDE BİR PROJE GERÇEKLEŞTİRME BİÇİMİ OLARAK YAPIM YÖNETİMİ MODELİ
CONSTRUCTION MANAGEMENT PROJECT DELIVERY SYSTEM AS A FORM OF PROJECT IMPLEMENTATION IN TURKISH PUBLIC PROCUREMENT |
| KİK, Yapım Yönetimi, Yapımcı Yapım Yöneticisi Proje Teslim Sistemi, Yapımcı Yapım Yöneticisi, Geleneksel Proje Teslim Sistemi, |
| KIK, Construction Management, Construction Manager as Constructor Project Delivery System, Construction Manager as Constructor, Traditional Project Delivery System, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
ÇELİK STRÜKTÜRLERİN YAŞAM DÖNGÜSÜ İÇİNDE SÜRDÜRÜLEBİLİRLİĞİNİN DEĞERLENDİRİLMESİ
LIFE CYCLE ASSESMENT OF STEEL STRUCTURES WITHIN THE FRAMEWORK OF SUSTAINABILTY |
| Çelik Strüktür, Yaşam Döngösü, Sürdürülebilirlik, Yapı, Yapı Tasarımı, |
| Steel Structures, Life Cycle Assessment, Sustainability, Construction, Construction Design, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
AISI 2205 / AISI 1020 MALZEME ÇİFTİNİN SÜRTÜNRME KAYNAĞI İLE BİRLEŞTİRİLMESİ
A PAIR OF AISI 2205 / AISI 1020 METARIAL COMBINATION WITH FRICTION WELDING METHOD |
| Sürtünme Kaynağı, AISI 2205, Dubleks Paslanmaz Çelikler, AISI 1020, Mikroyapı, |
| Friction Welding, AISI 2205, Duplex Stainless Steels, AISI 1020, Microstructure, |
|
Technological Applied Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
SÜRTÜNMELİ DELMEDE MİKRO YAPI VE MİKRO SERTLİĞİN ARAŞTIRILMASI
INVESTIGATION THE MICRO HARDNESS AND MICRO STRUCTURE IN FRICTION DRILLING |
| Sürtünmeli Delme, Mikro sertlik, Mikro yapı, Devir sayısı, Koniklik açısı, |
| Friction drilling, Micro hardness, Micro structure, Spindle speed, Conical angle, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
AĞIRLIK MALZEMELERİYLE KANUN ÇALIŞMANIN İCRAYA VE FİZYOLOJİK YAPIYA ETKİLERİ
THE EFFECTS OF PRACTICING QANUN WITH WEIGHTING MATERIALS ON THE PERFORMANCE AND THE PHYSIOLOGICAL STRUCTURES |
| Kanun, Müzik, Ağırlık malzemesi, İcra, Fizyolojik yapı, |
| Qanun, Music, Weighting material, Performance, Physiological structure, |
|
Fine Arts, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
1844-1845 TARİHLİ_ TEMETTÜAT DEFTERİNE GÖRE ANKARA EYALETİ KONUR KAZASI (NEFS-İ KONUR) KÖYÜNÜN SOSYAL VE EKONOMİK YAPISI
ANKARA PROVINCE KONUR COUNTYâ€â„¢S SOCIAL AND ECONOMICAL STRUCTURE ACCORDING TO 1844-1845 TEMETTÜAT NOTEBOOK |
| Ankara Eyaleti, Konur Kazası, Temettüat Defteri, Mesleki Yapılanma, Gelir, |
| Ankara Province, Konur County, Temettuat Notebook, Professional Structure, Revenue, |
|
Humanities Sciences, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
MODÜLER YAPIM TEKNİĞİ İLE BİNA ETKİNLİĞİNİ VE VERİMLİLİĞİNİ GELİŞTİRME YAKLAŞIMININ DEĞERLENDİRİLMESİ
EVALUATION OF THE DEVELOPMENT APPROACHES OF THE BUILDING EFFECTIVENESS AND EFFICIENCY WITH MODULAR CONSTRUCTION METHODS |
| Endüstriyel Yapım Yöntemleri, Modüler Kutu Sistem, Modüler Yapım, İleri Teknolojili Yapım, Prefabrikasyon, |
| Industrial Building Method, Modular Box System, Modular Construction, High-tech Construction, Prefabrication, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 4, Published Date : 1.10.2012 |
|
|
YIĞMA KONUTLARIN MALİYET TAHMİNİNDE YAPAY SİNİR AĞLARININ (YSA) KULLANILMASI
LEAF HOUSING USE OF COST ESTIMATE ARTIFICIAL NEURAL NETWORK (ANN) |
| Yapı Maliyeti, Yığma Konutlar, Yapay Sinir Ağları, Tahmin, Maliyet, |
| Cost Of Constructions, Masonry Buildings, Artificial Neural Network, Forecating, Cost, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 3, Published Date : 1.07.2012 |
|
|
MÜZİK ÖĞRETMENLİĞİ EĞİTİMİNDE YAPILANMA MODELLERİ (TÜRKİYE, AVUSTURYA, FİNLANDİYA, DANİMARKA VE TEXAS ÖRNEKLER)İ
FORMS OF STRUCTURINGS IN MUSIC TEACHER TRAINING (SAMPLES FROM TURKEY, AUSTRIA, FINLAND, DENMARK AND TEXAS) |
| Müzik Eğitimi, Müzik Öğretmeni, Öğretmen Yetiştirme, Yükseköğretim Yapılanması, Lisans Programı, |
| Music Education, Music Teacher, Teacher Training, Structuring of Higher Education, Bachelor Program, |
|
Fine Arts, Year : 2012, Volume : 7, Issue : 3, Published Date : 1.07.2012 |
|
|
PROGRAMLAMA DİLLERİ DERSİ İÇİN HAZIRLANAN KARMA ÖĞRENME ORTAMINA İLİŞKİN ÖĞRENCİ GÖRÜŞLERİ
STUDENTS’ VIEWS ON BLENDED LEARNING ENVIRONMENT DESIGNED FOR PROGRAMMING LANGUAGES COURSE |
| Programlama dilleri, karma öğrenme, yapılandırmacı yaklaşım, öğrenci görüşleri, Moodle, |
| Programming languages, blended learning, constructivism, students’ views, Moodle, |
|
Education Sciences, Year : 2012, Volume : 7, Issue : 2, Published Date : 1.04.2012 |
|
|
ÜSTYAPI PROJELERİNİN MALİYET TAHMİN ÇALIŞMALARINDA BELİRSİZLİKLERİN YAPAY ZEKA TEKNİKLERİYLE ANALİZİ
ANALYSIS OF UNCERTAINTIES FOR THE COST ESTIMATION OF BUILDING PROJECTS USING ARTIFICIAL INTELLIGENCE TECHNIQUES |
| Yapay Zeka Metotları, Proje Karakteristik Özellikleri, İnşaat Proje Yönetimi, Maliyet Tahmini, Proje Belirsizlikleri, |
| Artificial Intelligence Methods, Project Specific Properties, Construction Project Management, Cost Estimation, Project Uncertainties, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 2, Published Date : 1.04.2012 |
|
|
COĞRAFİ BİLGİ SİSTEMLERİ (CBS) TABANLI BİR YAPI YÖNETİMİ ÖNERİSİ
A GEOGRAPHIC INFORMATION SYSTEM (GIS) BASED CONSTRUCTION MANAGEMENT PROPOSAL |
| CBS, Yapı, Yapı Yönetimi, 3B Görselleştirme, Veritabanı, |
| GIS, Building, Construction Management, 3D Visualization, Database, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 2, Published Date : 1.04.2012 |
|
|
OKUMA YAZMA ÖĞRETİMİNDE ÖZEL BİR YÖNTEM: SES ODAKLI DİL ÖĞRETİM YÖNTEMİ
A SPECIAL METHOD IN TEACHING READING AND WRITING: VOICE-ORIENTED LANGUAGE TEACHING METHOD |
| Dil ve Konu?ma Sorunu Olan Çocuklar,, Türkçenin Yapysal Özellikleri,, Okuma Yazma Ö?retimi,, Ses Odakly Dil Ö?retim Yöntemi, YLKOKUMA YAZMA YÖNTEMLERY, |
| Children with speaking disabilities, Characteristics of Turkish Language, Teaching Literac, Voice-Oriented Language Teaching Method, PRIMARY LITERACY METHODS, |
|
Education Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
YAPILANDIRMACI COGRAFYA OGRETIMINDE HALK KULTURUNE DAYALI BIR DURUM CALISMASI
A CASE STUDY ON CONSTRUCTIVIST GEOGRAPHY TEACHING BASED UPON FOLK CULTURE |
| Yapılandırmacı ögretim,, cografya, cografya ögretimi, halk kültürü, halk kültürü ögretimi, |
| Constructivist teaching, geography, geography teaching, folk culture, folk culture teaching, |
|
Education Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
“MADDENİN TANECİKLİ YAPISI” ÜNİTESİNEE YÖNELİK ZENGİNLEŞTİRİLMİŞ BİLGİSAYAR DESTEKLİ BİR ÖĞRETİM MATERYALİNİN TANITIMI
INTRODUCTION OF AN ENRICHED COMPUTER BASED TEACHING MATERIAL ON THE PARTICULATE NATURE OF MATTER |
| Fen Eğitimi, Maddenin Tanecikli Yapısı, Bilgisayar Destekli Öğretim, Anlama Düzeyleri, Kavram Yanılgıları, |
| Science Education, Particulate Nature of Matter, Computer Based Teaching, Understanding Level, Alternative Conceptions, |
|
Education Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
İNŞAAT YÖNETİMİ ALANINDA YAPI MALİYETİ HESAPLARI İÇİN SUNUCU TABANLI UYGULAMALAR
APPLICATIONS OF SERVER BASED SOFTWARE FOR FIRST COST ESTIMATING IN CONSTRUCTION MANANGEMENT |
|
Osman AYTEKİN , Osman Murat KAYA , Hakan KUŞAN , İlker ÖZDEMİR |
| Hakediş, Yaklaşık Yapı Maliyeti, Metraj, MySQL, Veritabanı, |
| Monthly Payment Amount, First-Cost Estimating, Bill of Quantity, MySQL, Database, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
OSMANLI DÖNEMİNDE KULLANILAN YAKLAŞIK MALİYET TAHMİN YÖNTEMLERİ
COST ESTIMATION TECHNIQUES USED IN THE OTTOMAN ERA |
| Yapı, İnşaat, Renovasyon, Maliyet Tahmini, Osmanlı Dönemi, |
| Structure, Construction, Renovation, Cost Estimation, Ottoman Era, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
YÜKSEK YAPI ÇALIŞMALARINDA BİR VERİMLİLİK FAKTÖRÜ: RÜZGAR
A PRODUCTIVITY FACTOR IN HIGH RISE CONSTRUCTION: WIND |
|
S. Ümit DİKMEN , Sadık YİĞİT , Murat AKSEL , Murat SÖNMEZ , Bahar ŞENER |
| Rüzgar, Verimlilik, Kaba Yapı İşleri, Yüksek Katlı Yapılar, Hesaplamalı Akışkanlar Dinamiği, |
| Wind, Productivity, Structural Works, High Rise Buildings, Computational Fluid Dynamics, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
YAPI DENETİM KANUNU UYGULAMALARINDA SİVAS ÖRNEĞİ
THE BUILDING INSPECTION LAW APPLICATIONS: EXAMPLE OF SIVAS |
| Anket, Yapı Denetimi, Sivas, Yapı Denetim Kanunu, Uygulama Yönetmeliği, |
| Survey, Building inspection, Sivas, The law of building inspection, regulation of application, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
TÜRK İNŞAAT SEKTÖRÜNDE GRUP DAVRANIŞI VE GRUP YÖNETİMİ
GROUP BEHAVIOR AND GROUP MANAGEMENT IN TURKISH CONSTRUCTION SECTOR |
| Grup Davranışı, Proje Yönetimi, Tasarım Grubu, Yapı Denetimi, Taşeron, |
| Group Behavior, Project Management, Design Group, Building Audit, Sub-Contractor, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
SİGORTA MESELELERİ VE TASARIM VE YAPI İNŞAAT SÖZLEŞMELERİ
INSURANCE ISSUES AND DESIGN AND BUILD CONSTRUCTION CONTRACTS |
| Mücbir sebep, Risk, Sigorta, Sözleşme, Yapım, |
| Construction, Contract, Force majeure, Insurance, Risk, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
PİYASA GÖZETİMİ VE DENETİMİ SİSTEMİNİN İRDELENMESİ
EXAMINING OF MARKET SURVEILLANCE AND CONTROL SYSTEM |
| Piyasa Gözetimi ve Denetimi, Yapı Malzemeleri, CE ve G İşareti, İnşaat Sektörü, Kontrol, |
| Market surveillance and Control, Construction Materials, CE and S Marks, Construction Sector, İnspection, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
KATI ATIK YÖNETİMİ KONUSUNDA İNŞAAT SEKTÖRÜ PAYDAŞLARININ ALGILAMALARI:HATAY İLİ ÖRNEĞİ
PERCEPTIONS OF CONSTRUCTION SECTOR STAKEHOLDERS ABOUT SOLID WASTE MANAGEMENT: CASE STUDY OF HATAY PROVINCE |
| Yapı Denetim, Yıkıntı Atığı, Yüklenici, Belediye, Depolama, |
| Building Inspection, Demolition Waste, Contractor, Municipality, Depositing, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
YAPI DENETİM SÜRECİNDE KARŞILAŞILAN SORUNLAR VE ÇÖZÜM ÖNERİLERİ
PROBLEMS AND SOLUTION SUGGESTIONS IN CONSTRUCTION INSPECTION PROCESS |
| Sistem, Yapı Denetimi, Yazılım, Otomasyon, Standardizasyon, |
| System, Construction İnspection, Software, Automation, Standardization, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
BİLGİ VERİCİ METİN YAPILARI ÖĞRETİMİNİN OKUDUĞUNU ANLAMAYA ETKİSİ
THE EFFECT OF EXPOSITORY TEXT STRUCTURE ON READING COMPREHENSION |
| Bilgi Verici Metinler , Metinler, Metin Yapıları, Okuduğunu Anlama, , Statik-Grup Karşılaştırma Deseni, |
| Expository Texts , Texts, Text Structures, Reading Comprehension, Static-Group Comparison Design, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ÖĞRETMEN ADAYLARININ MESLEKİ YETERLİLİKLERİ VE MESLEKİ YETERLİLİKLERİNİ ETKİLEYEN FAKTÖRLER ARASINDAKİ İLİŞKİLERİN BELİRLENMESİ: BİR YAPISAL EŞİTLİK MODELİ ÖRNEĞİ
DETERMINATION OF RELATIONSHIPS BETWEEN PROFFESIONAL COMPETENCES OF PRE-SERVICE TEACHERS AND FACTORS EFFECTING PROFFESIONAL COMPETENCES: AN EXAMPLE OF STRUCTURAL EQUATION MODEL |
| Mesleki Yeterlilik, Öğretmen Adayı, Pedagojik Alan Bilgisi, Öz Yeterlik, Yapısal Eşitlik Modellemesi, |
| Professional Competence, Pre-service Teacher, Pedagogical Content Knowledge, Self-Efficacy, Structural Equation Modeling, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ELAZIĞ`DAKİ TARİHİ YAPILARIN TEMEL SİSTEMLERİNİN İNCELENMESİ
INVESTIGATION OF FOUNDATION SYSTEMS OF HISTORICAL BUILDINGS IN ELAZIG |
| Tarihi Yapılar, Temeller, Onarım, Güçlendirme, Röleve, |
| Historical Buildings, Foundations, Repair, Reinforcement, Survey, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
GAMA SPEKTROMETRESİ KULLANILARAK BAZI YAPI MALZEMELERİNDE DOĞAL RADYOAKTİVİTE
NATURAL RADIOACTIVITY IN SOME BUILDING MATERIALS USING A GAMMA-RAY SPECTROMETER |
| Yapı Malzemesi, Doğal Radyoaktivite, Gama Spektrometresi, NaI(Tl), Isparta, |
| Building Material, Natural Radioactivity, Gamma ray spectrometry, NaI(Tl), Isparta, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YAPI BİYOLOJİSİ VE ELEKTROİKLİMSEL KİRLİLİK
CONSTRUCTION BIOLOGY AND ELECTRO-CLIMATIC POLLUTION |
| Yapy Biyolojisi, Elektroiklimsel Kirlilik, İnsan Sağlığı, İç Mekan Hava Kalitesi, Yapı, |
| Construction Biology, Electro-climatic Pollution, Human Health, Indoor Air Quality, Building, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
TAŞIMA GÜCÜ ZAYIF OLAN ZEMİNLERDEKİ BİNALARIN DEPREM RİSK ANALİZİ (ELAZIĞ ÖRNEĞİ)
ANALYSIS OF EARTHQUAKE RISK BUILDINGS WITH LOW POWER CARRY FLOORS (Elazy? CASE) |
| Deprem, Yapı Hasarları, Risk Analizi, Zemin Taşıma Gücü, Elazığ, |
| Earthquake, Building Damage, Risk Analysis, Soil Bearing Capacity, Elazig, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
MEB EĞİTİM YAPILARI TASARIM ÖLÇÜTLERİ KAPSAMINDA TED KOLEJİ YERLEŞKESİNİN DEĞERLENDİRİLMESİ
ASSESMENT OF MEB TRAINING STRUCTURES DESIGN CRITERIA WITHIN THE CONTEXT OF TED COLLEGE ESKY?EHYR |
|
Çigdem Belgin (DIKMEN) TIPI , Zuhal ÖZÇETİN , Sümeyra PEKTAŞ |
| Eskişehir TED Koleji, Eğitim Yapılarının Tasarımı, Mimari Ölçütler, İşlevsellik, Eğitim Yapılarında Konfor, |
| Eski?ehir TED College, Designing Educational Buildings, Architectural Criteria`s, Functionalism, Comfort for Educational Buildings, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
STRATONIKEIA (ESKİHİSAR KÖYÜ) YERLEŞİMİNDE TARİHSEL GELİŞİM VE SOSYAL DEĞİŞİMİN KENTSEL DOKUYA ETKİLERİNİN İRDELENMESİ
EXAMINING THE EFFECTS OF HISTORICAL AND SOCIAL CHANGE IN URBAN TISSUE OF STRATONIKEIA (ESKYHYSAR VILLAGE) |
| Stratonikeia, Eskihisar, Sosyal Yapı, Kentsel Doku, Restorasyon, |
| Stratonikeia, Eskihisar, Social Structure, Urban Tissue, Restoration, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
KARBON ELYAF ÇUBUKLARLA GÜÇLENDİRİLMİŞ AHŞAP BOY BİRLEŞİMLERİNİN EĞİLME DAVRANIŞLARININ İNCELENMESİ
INVESTIGATION OF BENDING BEHAVIOUR OF TIMBER CONNECTION STRENGTHEN WITH CARBON FIBER BAR |
| Ahşap Yapy, Eğilme Mukavemeti, Kertmeli Boy Birleştirme, Karbon Elyaf Takviyeli Plastik (KTP), Güçlendirme, |
| Timber Structures, Bending Strength, Longitudinal Notched Lap Joint, Carbon Fiber Reinforced Plastic (CFRP), Reinforcement, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
SİSMİK ETKİLER ALTINDAKİ TELEKOMÜNİKASYON KULESİNİN YAPISAL DEĞERLENDİRMESİ
STRUCTURAL ASSESSMENT OF TELECOMMUNICATION TOWER UNDER SEISMIC EXCITATIONS |
| Deprem, Sonlu elemanlar yöntemiyle modelleme, Yer ivmeleri, Çelik Kule, Yapysal Analiz, |
| Earthquake, Finite Element Modeling, Natural ground motions, Steel Tower, Structural Analysis, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
KEBAN BARAJI’NA GİREN GÜNLÜK AKIMLARIN YAPAY SİNİR AĞLARI VE STOKASTİK YÖNTEMLER KULLANILARAK MODELLENMESİ
MODELING OF DAILY INFLOWS OF KEMER DAM USING ARTIFICIAL NEURAL NETWORKS AND STOCHASTIC METHODS |
| Keban Barajı, Günlük Akımlar, Yapay Sinir Ağları, Levenberg-Marquardt Optimizasyon Algoritması, AR(p) Modelleri, |
| Keban Dam, Daily Flows, Artificial Neural Networks, Levenberg-Marquardt Optimization Algorithm, AR(p) Models, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
MEVCUT BETONARME BİNALARIN DEPREM PERFORMANSLARININ YAPAY SİNİR AĞLARI YÖNTEMİ KULLANILARAK BELİRLENMESİNDE BETON PARAMETRESİNİN ETKİSİ
EFFECT OF CONCRETE ON DETERMINING EARTHQUAKE PERFORMANCES OF EXISTING REINFORCED CONCRETE BUILDINGS BY USING ANN |
| Betonarme Bina, Performans Analizi, Deprem, Yapay Sinir Ağları, Beton Parametresi, |
| Reinforced Concrete Building, Performance Evaluation, Earthquake, Artificial Neural Network, Concrete Parameter, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
MEKÂN ALGISI ÜZERİNE FARKLI BİR YAKLAŞIM: AKILLI SİSTEM UYGULAMASI
A DIFFERENT APPROACH on SPATIAL PERCEPTION: |
|
Musa Hakan ARSLAN , Murat Ceylan , Hatice Derya ARSLAN , Kerim ÇINAR , Pınar DİNÇ |
| Sınyı Öğretmenleri, Mekânsal Algı, Sınıf Tasarımı, İstatistiksel Analiz, Yapay Sinir Ağları, |
| Classroom teacher, Spatial perception, Classroom design, Artificial Neural Networks, Statistical analysis, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YAPI İŞLERİNDE SAĞLIK VE GÜVENLİK PLANI
SAFETY AND HEALTH PLAN FOR CONSTRUCTION WORKS |
| Sağlık ve Güvenlik Planı, İş Güvenliği Planı, İş Sağlığı ve Güvenliği, Yapı İşleri, İş Sağlığı, |
| Safety and Health Plan, Occupational Safety Plan, Occupational Health and Safety, Construction Works, Occupational Health, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ÇOK KATLI YAPILARIN STATİK İTME EĞRİSİNİN ELDE EDİLMESİ İÇİN PRATİK BİR YÖNTEM
A PRACTICAL METHOD FOR DETERMINATION OF THE PUSHOVER CURVES OF MULTISTOREY STRUCTURES |
| Statik itme eğrisi, Yapı, Deprem, Pratik yöntem, Doğrusal olmayan statik analiz, |
| Pushover curves, Structure, Earthquake, Practical method, Nonlinear static analysis, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
TÜNEL KALIP SİSTEMLERİN GELENEKSEL SİSTEMLERLE KARŞILAŞTIRILMASI
COMPARISON TRADITIONAL SYSTEMS OF TUNNEL FORMWORK SYSTEM |
| Tünel Kalıp Sistem, Geleneksel Kalıp Sistemi, Perdeli Yapı, Perde-Çerçeveli Yapı, Perde Duvar, |
| Tunnel Formwork System, Traditional Form System, Shear-Wall Building, Shear Wall-Frame System, Shear Wall, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
TARİHİ TAŞ YIĞMA KONUTLARIN GÜÇLENDİRİLMESİNDE KULLANILAN YÖNTEMLER: ÜRGÜP İBRAHİM PAŞA KÖYÜNDEN BİR KONUT ÖRNEĞİ
THE STRENGTHENING METHODS USING IN STONE MASONRY HISTORICAL BUILDINGS: AN EXAMPLE FROM ÜRGÜP İBRAHİM PAŞA VILLAGE |
| Tarihi yapı, Hasar, Onarım, Güçlendirme, Taş Yığma , |
| Historical Building, Damage, Repair, Strengthening, Stone Masonry, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
DIŞ DUVAR UYGULAMALARINDA SES GEÇİRİMLİLİĞİ VE SES YALITIMI ÖZELLİKLERİ
SOUND PERMEABILITY AND SOUND INSULATION PROPERTIES OF OUTER WALL APPLICATIONS |
| Ses Yalıtımı, Ses Geçirimliliği, Akustik, Yapı Kabuğu, Dış Duvar, |
| Sound Insulation, Sound Permeability, Acoustic, Building Envelope, Outer Wall, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
FARKLI YAPIM YILLARINA GÖRE KONUT-KULLANICI MEMNUNİYETİNİN İSTATİSTİKSEL DEĞERLENDİRİLMESİ: ELAZIĞ ÖRNEĞİ
STATISTICAL EVALUATION OF USER SATISFACTION WITH HOUSING CONSTRUCTION IN DIFFERENT YEARS: THE CASE OF ELAZI? |
| Kullanıcı memnuniyeti, Konut, Konut kalitesi, Konut yapım yılı, Konut üretimi, |
| User satisfaction, Housing, Housing quality, Housing production year, Housing production, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ATIK MERMER TOZU VE CAM LİF KATKILI BETONLARIN BASINÇ DAYANIMLARININ YAPAY SİNİR AĞLARI İLE TAHMİNİ
ESTIMATION OF COMPRESSIVE STRENGTH OF WASTE MARBLE DUST AND GLASS FIBRE INCLUDED CONCRETES BY ARTIFICIAL NEURAL NETWORK |
| Cam Lif, Atık Mermer Tozu, Beton, Yapay Sinir Ağı, Basınç Dayanımı, |
| Glass Fibre, Waste Marble Dust, Concrete, Artificial Neural Network, Compressive Strength, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YAPAY SİNİR AĞLARI İLE ATIK MERMER TOZU VE CAM LİF KATKILI BETONLARIN YARMADA ÇEKME DAYANIMLARININ TAHMİNİ
ESTIMATION OF SPLITTING TENSILE STRENGTH OF CONCRETES WITH WASTE MARBLE DUST AND GLASS FIBRE BY ARTIFICIAL NEURAL NETWORK |
| Cam Lif, Atık Mermer Tozu, Beton, Yapay Sinir Ağı, Yarmada Çekme Dayanımı, |
| Glass Fibre, Waste Marble Dust, Concrete, Artificial Neural Network, Splitting Tensile Strength, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YAPILARDA RADON FENOMENİ VE RADON-SAĞLIK İLİŞKİSİ
RADON PHENOMENA IN BUILDINGS AND RADON-HEALTH RELATIONSHIP |
| Radon, Yç Ortam Hava Kalitesi, Sularda Radon, Binalarda Radon, Yapyda Konfor ?artlary, |
| Radon, Indoor Air Quality, Radon in Water, Radon in Buildings, Comfort Conditions in Building, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YAPISAL EŞİTLİK MODELLEMESİNDE ÇOK DEĞİŞKENLİ NORMALLİK VARSAYIMI ALTINDA BİR UYGULAMA
AN APPLICATION OF STRUCTURAL EQUATION MODELING UNDER THE ASSUMPTION OF MULTIVARIATE NORMALITY |
| Yapısal Eşitlik Modellemesi, Tahmin Metodu, R, LISREL, Normallik Varsayımı, |
| Structural Equation Modeling, Estimating Method, R, LISREL, Assumption of Normality, |
|
Physical Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ELİT ALTI BAYAN VOLEYBOL OYUNCULARININ FİZİKSEL, ANTROPOMETRİK VE SOMATOTİP ÖZELLİKLERİNİN OYUN MEVKİLERİNE GÖRE İNCELENMESİ
INVESTIGATION OF PHYSICAL, ANTROPOMETRIC AND SOMATOTYPE CHARACTERISTIC ON UNDERELITE FEMALE VOLLEYBALL PLAYERS ACCORDING TO PLAYING POSITIONS |
| Voleybol, Oyun Mevkisi, Fiziksel Yapı, Somatotip, Antropometri, |
| Volleyball, Playing position, Physical Characteristic, Somatotype, Anthropometry, |
|
Sport Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
6. SINIF MATEMATİK DERSİ ÖĞRETİM PROGRAMININ UYGULANABİLİRLİĞİNE İLİĞKİN ÖĞRETMEN GÖRÜĞLERİ
TEACHERS’ OPINIONS ABOUT THE APPLICABILITY OF 6. GRADE MATHEMATICS CURRICULUM |
| İlköğretim Matematik Öğretim Programı, Öğretim Süreci, Yapılandırmacı Yaklaşım, Matematik Öğretmeni, Öğretmen Görüşleri, |
| Mathematics Curriculum, Learning-teaching Period, Constructive Approach, Mathematics Teacher, Teacher' Opinions , |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
ORTAÖĞRETİM 10. SINIF KİMYA DERSİ ÖĞRETİM PROGRAMINDA YER ALAN “ATOMUN YAPISI” ÜNİTESİ İLE İLGİLİ ÖĞRETMEN GÖRÜŞLERİ
TEACHERS’ OPINIONS ABOUT “THE STRUCTURE OF ATOM” WHICH IS INCLUDED IN THE SECONDARY EDUCATION CURRICULUM OF 10TH GRADE CHEMISTRY CLASS |
| Kimya, Kimya Öğretim Programı, Ortaöğretim, Öğretmen Görüşleri, Atomun Yapısı, |
| Chemistry, Chemistry Curriculum, Secondary Education, Opinions of Teachers, The Structure of Atom, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
ANİ ZEMİN HAREKETİ NEDENİYLE OLUŞAN YAPISAL HASARLAR: BİR DURUM ÇALIŞMASI
STRUCTURAL DAMAGES CAUSED BY SUDDEN GROUND MOVEMENT: A CASE STUDY |
| Yapısal hasar, Zemin hareketi, Tünel kazısı, Zemin güçlendirmesi, Zemin iyileştirmesi, |
| Structural damage, ground movement, tunnel excavation, ground strengthening, ground improvement, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
YIĞMA YAPI TUĞLASININ BASINÇ ALTINDAKİ SICAKLIK DAVRANIŞININ İNFRARED TERMOGRAFİ TEKNİĞİ İLE İNCELENMESİ
AN ANALYSIS OF THERMAL BEHAVIOR OF MASONRY CONSTRUCTION BRICK UNDER PRESSURE USING INFRARED THERMOGRAPH TECHNIQUE |
| YAPI HASARI, İNFRARED TERMOGRAFI, YIĞMA YAPI, TUĞLA, BASINÇ DAYANIMI, |
| BUILDING DAMAGE, INFRARED THERMOGRAPHY, MASONRY HOUSES, BRICK, COMPRESSIVE STRENGTH, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
3B GRAVİTE HESAPLARIYLA DOĞU PONDİTLERDE KABUK ÇALIŞMASI
CRUST STUDYING IN THE EASTERN PONTIDES BY 3D GRAVITY ALGORIHM |
| Gravite, 3-B Modelleme, Derinlik, Kabuk Yapısı, Moho , |
| Gravity, 3-D Modeling, Depth, Crustal Structure, Moho, |
|
Nature Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
TEACHERS’ INTRINSIC AND EXTRINSIC MOTIVATION AS PREDICTORS OF STUDENT ENGAGEMENT: AN APPLICATION OF SELF-DETERMINATION THEORY
ÖĞRETMENIN İÇSEL VE DIŞSAL GÜDÜLENMESININ ÖĞRENCI KATILIMINA ETKISI: BIR ÖZ-BELIRLEME KURAMI UYGULAMASI |
| Öz-Belirleme Kuramı, İçsel Güdülenme, Dışsal Güdülenme, Öğrenci Katılımı, Yapısal Eşitlik Modellemesi, |
| Self-Determination Theory, Intrinsic motivation, Extrinsic motivation, Student engagement, Structural equation modelling, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
SOCIAL CONSTRUCTIVIST APPROACH: (RE) TRANSFORMATION OF “LITTLE RED RIDING HOOD” FOR WRITING COURSE
SOSYAL YAPILANDIRMACI YAKLAŞIM: “KIRMIZI BAŞLIKLI KIZ”IN YARATICI YAZMA DERSİNE (YENİ)’DEN UYARLANMASI |
| Yazma , Yabancı Dil Olarak İngilizce, İleri Düzey Öğrencisi, Yapılandırmacılık , x, |
| Writing, Constructivism, , , English as a Foreign Language, Advanced Learner, x, x, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
YAPAY SİNİR AĞLARI (YSA) YÖNTEMİ İLE GLOBAL RADYASYON TAHMİNİ
ESTIMATION OF GLOBAL RADIATION WITH ARTIFICIAL NEURAL NETWORKS (ANN) METHOD |
| YAPAY SİNİR AĞLARI, GÜNEŞ RADYASYONU, GLOBAL RADYASYON, ISPARTA, SICAKLIK, |
| Artificial Neural Networks, Solar radiation, Global radiation, Isparta, Temperature, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
ÇOCUK HASTALARDA DİŞ HEKİMLERİ TARAFINDAN KULLANILAN DAVRANIŞ YÖNETİM TEKNİKLERİNE KARŞI AİLELERİN BAKIŞ AÇILARININ DEĞERLENDİRİLMESİ
EVALUATION OF THE PARENTAL ACCEPTANCE TOWARDS BEHAVIORAL MANAGEMENT TECHNIQUES UTILIZED BY DENTISTS IN PEDIATRIC PATIENTS |
| Davranış yönetimi, Anlat-göster-yap, Ses kontrolü, Genel anestezi, Pedodonti, |
| Behavioral management, tell-show-do, voice control, general anesthesia, pedodontics, |
|
Life Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
BARTIN İLİ İŞGÜCÜ PİYASASININ İNCELENMESİ
INVESTIGATION OF THE LABOUR MARKET OF BARTIN CITY |
| İşgücü , İşsizlik, Bartın İşgücü Piyasası , Bartın İli İstihdam Yapısı, Sosyo-Ekonomik Sorunlar, |
| Labour , Unemployment, Bartın Labour Market , Bartın City Employment Structure, Social-Economics Problems, |
|
Social Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
YAPAY SİNİR AĞI (YSA) KULLANILARAK TOPRAK SICAKLIĞI TAHMİNİ
ESTIMATION OF SOIL TEMPERATURE WITH ARTIFICIAL NEURAL NETWORKS (ANN) METHOD |
| Yapay Sinir Ağları, Toprak sıcaklığı, Denizli, Meteorolojik veri, Sıcaklık, |
| Artificial Neural Networks, Soil temperature, Denizli, Meteorological data, Temperature, |
|
Technological Applied Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
SES ÇAĞRIŞIMLI BÜTÜNLEŞİK KELİME YÖNTEMİ
SOUND ASSOCIATIVE INTEGRATED WORD METHOD |
| Okuma-Yazma Öğretimi , Dilin Yapısal Özellikleri, Ses Çağrışımlı Bütünleşik Kelime Yöntemi , Okuma Yazma Yöntemleri, Okuma Yazma Öğretiminde Sorunlar, |
| Literacy Teaching, Structural Characteristics of Language, Sound Associative Integrated Word Method, Reading and Writing Methods, Reading-Writing Problems, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
MİMARLIK EĞİTİMİ ALAN ÖĞRENCİLERİN MALZEME BİLGİLERİNİN ARTTIRILMASINA YÖNELİK BİR GEZİ MODELİ ÖNERİSİ
PROPOSAL OF A TRIP MODEL TO INCREASE MATERIAL KNOWLEDGE AMONG ARCHITECTURE STUDENTS |
| Mimarlık, Eğitim, Yapı Malzemesi Öğretimi, Fabrika Gezisi, Gezi Modeli, |
| Architecture, Education, Construction Material Teaching, Factory Visit, Visit Model, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
MANTOLAMA YÖNTEMİ İLE GÜÇLENDİRİLMİŞ KİRİŞ ELEMANLARIN BULANIK MANTIK YÖNTEMİ İLE SÜNEKLİĞİNİN TAHMİN EDİLMESİ
FORECASTING WITH FUZZY LOGIC DUCTILITY OF REINFORCED CONCRETE JACKETING METHOD OF BEAM ELEMENTS |
| Mantolama, Güçlendirme, Bulanık Mantık, Yapay Zeka, Kiriş, |
| Jacketed, Reinforcement, Fuzzy Logic, Artificial Intelligence, Beam, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
BULANIK YAKLAŞIM İLE TORNALAMA İŞLEMİNDE YÜZEY PÜRÜZLÜLÜĞÜNÜN BELİRLENMESİ
THE DETERMINATION OF SURFACE ROUGHNESS VIA FUZZY APPROACH IN TURNING |
|
İsmail SARITAŞ , Şakir Taşdemir , Süleyman YALDIZ , Süleyman Neşeli |
| Bulanık Kural Tabanı, Yapay Zeka, Takym Geometrisi, Bulanık Mantık, Yüzey Pürüzlülük, |
| Fuzzy Rule Base, Artificial Yntelligence, Tool Geometry, Fuzzy Logic, Surface Roughness, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
TUZ KRİSTALLEŞMESİNİN YAPI MALZEMESİ OLARAK KULLANILAN TÜFLER ÜZERİNDEKİ ETKİSİ
THE EFFECT OF SALT CRYSTALLIZATION ON TUFF USED AS BUILDING MATERIAL |
| Bozunma, Yapı Malzemesi, Tuz Kristalleşmesi, Kuru Ağırlık Kaybı, Ultrasonik Hız, |
| WEATHERING, BUILDING MATERIAL, SALT CRYSTALIZATION, DRY WEIGHT LOSS, ULTRASONIC VELOCITY, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
ÇATLAKLI BASINÇ ÇUBUKLARINDAKİ BURKULMA PROBLEMİNİN TRANSFER MATRİSİ YÖNTEMİ VE YAPAY SİNİR AĞLARI İLE İNCELENMESİ
CRITICAL BUCKLING LOAD ESTIMATION OF THE COMPRESSION RODS USING ARTIFICIAL NEURAL NETWORKS METHOD |
| Narin Prizmatik Çubuklar, Burkulma, Açık Kenar Çatlağı, Yapay Sinir Ağları, Transfer Matrisi Yöntemi, |
| Slender Prismatic Columns, Buckling, Open Edge Crack, Artificial Neural Networks, Transfer Matrix Method, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
YAPAY SİNİR AĞLARI YAKLAŞIMI İLE TAHTAKÖPRÜ BARAJINDAKİ AYLIK BUHARLAŞMA TAHMİNİ
THE ESTIMATION OF THE AMOUNT OF THE MONTHLY VAPORATION AT THE DAM OF TAHTAKÖPRÜ WITH THE APPROACH OF THE ARTIFICIAL NEURAL NETWORKS |
| Yapay Sinir Ağları (YSA), Baraj Haznesi, Buharlaşma, Çoklu-Lineer Regresyon (MLR), Otoregresif Model (AR(p), |
| Artificial Neural Network (ANN), Dam Reservoir, Evaporation, Multi-linear Regression, Autoregressive Models (AR(p), |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
YAĞIŞ-AKIŞ İLİŞKİSİNİN MODELLENMESİNDE YSA KULLANIMININ DEĞERLENDİRİLMESİ: ORTA FIRAT HAVZASI UYGULAMASI
ASSESSMENT OF USING ANN FOR MODELLING THE RAINFALL-RUNOFF RELATION: AN APPLICATION FOR MIDDLE PART OF EUPHRATES BASIN |
| Yapay Sinir Ağları, Yağış-Akış, Orta Fırat Havzası, Çoklu Doğrusal Regresyon, Akım Tahmini, |
| Artifical Neural Network, Rainfall-Runoff, Middle Part of Euphrates Basin, Multi Linear Regression, Flow Estimation , |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
TRAFİK KAYNAKLI GÜRÜLTÜNÜN YAPAY SİNİR AĞLARI İLE TAHMİNİ
PREDICTION OF NOISE CAUSED BY URBAN TRAFFIC BY ARTIFICIAL NEURAL NETWORK |
| Yapay Sinir Ağları , Trafik, Gürültü, Yapay Zekâ Teknikleri, Gürültü Tahmini, |
| Artificial Neural Network, Traffic, Noise, Artificial Intelligence Techniques, Noise Prediction , |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
TUNCELİ İLİ İÇİN GÜNEŞ IŞINIMININ YAPAY SİNİR AĞLARI İLE TAHMİNİ
GLOBAL RADIATION PREDICT BY USING ARTIFICIAL NEURAL NETWORK FOR TUNCELI CITY |
| Güneş Enerjisi, Işınım, Yapay Sinir Ağları, Meteoroloji, Modelleme, |
| Solar Energy, Radiation, Artificial Neural Network, Meteorology, Modeling, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
ENERJİ İLETİM HATLARINDA MODÜLER YSA VE ADD YLE HIZLI ARIZA TESPİTİ
FAST FAULT DETECT AT POWER TRANSMYSSYON LYNES WYTH MODULAR NN AND DWT |
| Enerji İletim Hatlary, Gerçek Arıza Kayıtları, Ayrık Dalgacık Dönüşümü, Modüler Olasılıksal Yapay Sinir Ağları, Modüler, |
| Power Transmission Lines, Real Fault Data, Discreete Wavelet, Modular Probabilistic Neural Network, Modular, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
SIZINTI SUYUNDAN NİKEL (II) İYONLARI GİDERİM VERİMİNİN YAPAY SİNİR AĞLARI İLE TAHMİN EDİLMESİ
PREDICTION OF NICKEL (II) IONS REMOVAL EFFICIENCY FROM LEACHATE USING ARTIFICIAL NEURAL NETWORK |
| Adsorpsiyon, Modelleme, Nikel (II) İyonları, Yapay Sinir Ağları, Zeolit, |
| Adsorption, Artificial Neural Networks, Modeling, Nickel (II) Ions, Zeolite, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
ZAYIF EKSENDE EĞİLEN U KESİTLİ KİRİŞLERİN SONLU ELEMAN MODELLEMESİNDE ÇÖZÜM AĞI SIKLIĞI ETKİSİNİN İNCELENMESİ
INVESTIGATION OF MESH SIZE EFFECT IN FINITE ELEMENT ANALYSIS OF MINOR AXIS BENDING U SECTION BEAMS |
| Sonlu elemanlarla modelleme, U kesitli kirişler, Çözüm ağı yoğunluğu, Çelik Yapı Elemanları, ABAQUS, |
| Finite element modeling, U section beams, Mesh density, Steel Structure Elements, ABAQUS, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
GA İLE OPTİMAL DEĞİŞKEN YAPILI GÜÇ SİSTEM KARARLAYICISI TASARIMI
VVARIABLE STRUCTURE POWER SYSTEM STABILIZER OPTIMIZED BY GENETIC ALGORITHM |
| Güç Sistem Kararlayıcı, Uyarma Kontrol, Değişken Yapılı Kontrol, Genetik Algoritmalar, Optimizasyon, |
| Power Systems Stabilizer, Excitation Control, Variable Structure Control, Genetic Algorithms, Optimization, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
SAZAN ÜRETİMİNDE YUMURTA YAPIŞKANLIĞININ GİDERİLMESİNDE KULLANILAN SOLÜSYONLARDA BİYOTEKNİK GELİŞMELER
BIOTECHNICAL DEVELOPMENTS OF EGG STICKINESS ELIMINATION SOLUTIONS USED IN CARP REPRODUCTION |
| Sazan, üretim, Dölleme solusyonu, Yumurta, Yapışkanlık, |
| Carp, Reproduction, Fertilizing solution, Egg, Stickiness, |
|
Ecological Life Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
HAZAR GÖLÜ (ELAZIĞ) LİTORAL BÖLGESİNİN SEDİMENT KOMPOZİSYONU
SEDIMENT COMPOSITION OF LITTORAL REGION OF LAKE HAZAR |
| Sediment, Sediment yapısı, Litoral bölge, Hazar Gölü, Elazığ, |
| Sediment, Sediment composition, Littoral region, Lake Hazar, Elazig, |
|
Ecological Life Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
YENiÇAĞA GÖLÜ’NDE (BOLU) BALIKÇILIK, BALIK POPULASYONLARI ve SÜRDÜRÜLEBİLİR BALIKÇILIK YÖNETİMİ
FISHING, FISH POPULATION AND SUSTAINABLE FISHING MANAGEMENT IN THE LAKE YENIÇAĞA (BOLU) |
| Yeniçağa Gölü, Balıkçılık, Populasyon Yapısı, Sürdürülebilir Balıkçılık Yönetimi, Bolu, |
| Yenicaga Lake, Fishing, Population Structure, Sustainable Fishing Management, Bolu, |
|
Ecological Life Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
SINIF ÖĞRETMENLERİNİN YAPILANDIRMACI ORTAM DÜZENLEME BECERİLERİNİN İNCELENMESİ
THE INVESTIGATION OF THE CONSTRUCTIVIST ENVIRONMENT REGULATION ABILITIES OF CLASSROOM TEACHERS |
| Öğretmen eğitimi, Sınıf öğretmeni, Öğretmen özellikleri, Yapylandyrmacılık, Yapılandırmacı ortam, |
| Teacher Education, Classroom teacher, Teacher characteristics, Constructivism, COnstructivist environment, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
ÖZEL ÖĞRETİM YÖNTEMLERİ DERSİNİN FEN ÖĞRETMEN ADAYLARININ FEN ÖĞRETME FELSEFELERİNE ETKİSİ
THE EFFECTIVENESS OF METHODS OF TEACHING COURSES ON PRESERVICE SCIENCE TECAHERS’ PHILOSOPHY ABOUT SCIENCE TEACHING |
| Öğretmen Yetiştirme Programı , Yapılandırmacı Yaklaşım, Özel Öğretim Yöntemleri Dersi, Öğretim Metotları, Fen Öğretme Felsefeleri , |
| Teacher Education Program, Constructivist Approach, Methods of Teaching, Methods Course , Philosophy about Science Teaching , |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
TÜRKİYE’DEKİ FEN ÖĞRETMENLERİ NE KADAR YAPILANDIRMACI? : PISA 2006 SONUÇLARI ÜZERİNE BİR DEĞERLENDİRME
TO WHAT EXTEND SCIENCE TEACHERS IN TURKEY ARE CONSTRUCTIVIST?: AN ASSESSMENT ON PISA 2006 RESULTS |
|
Ertug Evrekli , Huriye DENİŞ ÇELİKER , Ali Günay BALIM , Didem İNEL |
| PISA 2006 , Yapılandırmacı Öğrenme Yaklaşımı, Öğretmen, Fen Öğretmenleri, Öğrenci , |
| PISA 2006, PISA 2006 student questionnaire, Science teachers, Classroom teacher activities, Constructivist approach, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
OLAY TEMELLİ ÖĞRENMEDE ÇÖZÜMLEME (ANALİZ) TEKNİĞİ VE COĞRAFYA ÖĞRETİMİNDE KULLANILMASINA BİR ÖRNEK: FIRTINALAR
ANALYSIS TECHNIQUE AT CASE BASED LEARNING AND A SAMPLE STUDY: “STORMS”, IN THE TEACHING OF GEOGRAPHY |
| Coğrafya Eğitimi, Yapılandırmacılık, Olay Temelli Öğrenme, Çözümleme Tekniği, Fırtınalar, |
| Geography Education, Constructivism, Case based Learning, Analysis Technique, Storms, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
İLKÖĞRETİM ÖĞRENCİLERİNİN FEN VE TEKNOLOJİ DERSİNDE ÖĞRENDİKLERİNİ GÜNLÜK YAŞAMLARINDA KULLANIM DÜZEYLERİ
PRIMARY SCHOOL STUDENTS’ USAGE LEVELS OF SCINCE AND TECHNOLOGY COURSE KNOWLEDGE IN THEIR DAILY LIVES |
| Fen ve Teknoloji Dersi, Öğretim, Günlük Yaşam, Öğrenme, Yapılandırmacılık, |
| Science and Technology Course, Teaching, Daily Life, Learning, Constructivism, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
NANOTEKNOLOJİ VE YAPI MALZEMESİ ALANINA ETKİLERİ
NANOTECHNOLOGY IN OUR CENTURY AND ITS EFFECTS ON BUILDING MATERIALS |
| Nanoteknoloji, Yapı Malzemesi, Nanomalzeme, Mimarlık, Nanomimarlık, |
| Nanotechnology, Building Material, Nanomaterial, Architecture, Nanoarchitecture, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
PREFABRİK BETONARME PLAKLAR İLE ÇOK AMAÇLI KENTİÇİ YOL YAPIMI
MULTI-PURPOSE URBAN ROAD CONSTRUCTION WITH PREFABRICATED CONCRTE PLATE |
| Prefabrik Eleman , Öngerilemeli Eleman, Betonarme, Altyapı, SAP2000, |
| Prefabricated Member, Prestressed Member, Reinforced Concrete, Infrastructure, SAP2000, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
FARKLI ANLAMSAL YAPILARDAKİ PROBLEMLERİN ÇÖZÜMÜNDE KULLANILAN İŞLEM TEKNİKLERİNİN DEĞERLENDİRLMESİ
EVALUATION OF OPERATION TECHNIQUES USED FOR THE SOLUTION OF PROBLEMS WITH DIFFERENT SEMANTIC STRUCTURE |
| Sözel Problemler , Problem Çözme , İşlemler, Problemlerin Anlamsal Yapıları , Matematik Eğitimi, |
| Word Problems , Problem Solving, Operations, Semantic Structures of the Problems, Mathematics Education, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
DİK İZDÜŞÜMÜ ÜNİTESİNE YÖNELİK GELİŞTİRİLEN ÇALIŞMA YAPRAKLARININ UYGULANABİLİRLİĞİNİN İNCELENMESİ
THE INVESTIGATION OF APPLICABILITY OF WORKSHEETS WAS DEVELOPED FOR PROJECTION UNIT IN SOLID GEOMETRY |
| Uzay Geometri, İzdüşümü, Dinamik Geometri Yazılımı, Cabri 3D, Çalışma Yaprağı, |
| Solid Geometry, Projection, Dynamic Geometry Software, Cabri 3D, Worksheet, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
İLKÖĞRETİM OKULU ÖĞRETMENLERİNİN STRESLE BAŞA ÇIKMA STİLLERİNİN YAŞAM ÇATIŞMALARI ÜZERİNDEKİ ETKİSİ: NEDENSEL BİR ARAŞTIRMA
THE EFFECT OF STYLES OF COPING WITH STRESS ON THE LIFE CONFLICTS: A CAUSAL ANALYSIS IN THE SAMPLE OF PRIMARY SCHOOL TEACHERS |
| Stres, Başa Çıkma, Yaşam Çatışması , Yapısal Eşitlik Modeli, İlköğretim, |
| Stress, Coping, Life conflict, Structural equation model, Teacher, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
İLKÖĞRETİM 5. SINIF YOĞUNLUK KONUSUNDA BİLİMSEL SORGULAMAYA DAYALI LABORATUVAR ETKİNLİK ÖRNEĞİ
LABARATORY ACTIVITY SAMPLE BASED ON INQUIRY ON THE SUBJECT OF ELEMENTARY EDUCATION FIFTH GRADE DENSITY |
| Bilimsel sorgulama, 5E , Yoğunluk, Laboratuvar Etkinlikleri, Yapılandırılmış Sorgulama, |
| Inquiry, 5E , Density, Labaratory Activities, Structured inquiry, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
YAPIŞTIRICILARIN MEKANİK ÖZELLİKLERİNİN BULK NUMUNELER YARDIMIYLA BELİRLENMESİ
DETERMYNATION OF MECHANICAL PRPOPERTIES OF ADHESIVES CERTAIN VIA SPECIMENS |
| Yapıştırıcı, Bulk Numune, Vinylester Atlac 580, Flexo Tix, Elastisite modülü, |
| Adhesive, Bulk Specimen, Vinylester Atlac 580, Flexo Tix, Elastisite Modul, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
TÜRKİYE’DE GELENEKSEL KIR KONUT YAPISININ 20. YÜZYILDAKİ DEĞİŞİMİNE YEŞİLOVA (BURDUR) ÖRNEĞİ
YEŞILOVA (BURDUR) - AN EXAMPLE OF CHANGE IN THE TRADITIONAL RURAL HOUSE STRUCTURE IN TURKEY DURING THE 20TH CENTURY |
| Geleneksel Kır Konutları , Kır Yerleşmeleri, Konut Yapı Değişimi, Kültür, Yeşilova (Burdur), |
| Traditional rural house, Rural settlements, Change in house structure, Culture, Yeşilova (Burdur), |
|
Nature Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
AVUSTRALYA SPOR YÖNETİM SİSTEMİ
AUSTRALIA SPORT MANAGEMENT SYSTEM |
| Spor Yönetimi, Yönetim, Spor Komisyonu, Yönetim Yapısı, Yönetim Sistemi, |
| Sport Management, Management, Sport Commission, Management Structure, Management System, |
|
Sport Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
DEMOKRATİK YAPILANDIRMACI ÖĞRENME ORTAMI ÖLÇEĞİ GELİŞTİRİLMESİ
DEVELOPING DEMOCRATIC CONSTRUCTIVIST LEARNING ENVIRONMENT SCALE |
| Yapılandırmacılık, Öğrenme Ortamı, Demokratik Ortam, Ölçek Geliştirme, Öğretmen Yetiştirme, |
| Constructivism , Learning Environment , Democratic Environment, Scale Development, Teacher Training, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
GERÇEK ZAMANLI BİR SALDIRI TESPİT SİSTEMİ TASARIMI VE GERÇEKLEŞTİRİMİ
DESIGN AND IMPLEMENTATION OF A REAL TIME INTRUSION DETECTION SYSTEM |
| Saldırı Tespit Sistemleri, Dos Saldırıları, Brute Force Atakları, Veri Madenciliği, Yapay Sinir Ağları, |
| Intrusion Detection Systems, DOS attacks, Brute Force attacks, Data Mining, Artificial Neural Networks, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
TOZALTI ARK KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI KALINLIKTAKİ GRADE A GEMİ SACLARININ MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE MECHANICAL PROPERTIES OF DIFFERENT THICKNESS OF THE GRADE A SHIP PLATES JOINED BY SUBMERGED ARC WELDING |
|
Behçet GULENC , Nizamettin KAHRAMAN , Yakup KAYA, Ahmet DURGUTLU |
| Gemi sacı, Tozaltı ark kaynağı, Mekanik özellikler, Mikroyapı, Sertlik, |
| Ship plate, submerged arc welding, mechanical properties, microstructure, hardness, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
OTOKORELASYONLU GÖZLEMLER İÇİN KONTROL KARTLARI: LİTERATÜR TARAMA
CONTROL CHARTS FOR AUTOCORRELATED PROCESSES: A REVIEW |
| Kontrol Kartları , Otokorelasyon, Literatür Taraması, Artık Terimler İçin Kontrol Kartları, Yapay Sinir Ağı Tabanlı Kontrol Kartları , |
| Control Charts , Autocorrelation , Literature Review , Residual Control Charts, Neural Network Based Control Charts, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
TÜRKİYE’DE DEPREM RİSKİ ALTINDAKİ BETONARME BİR YAPININ REHABİLİTASYON SÜRECİNİN İNCELENMESİ
REHABILITATION OF A REINFORCED CONCRETE BUILDING IN TURKEY UNDER THE RISK OF EARTHQUAKE |
| Betonarme Yapı, Rehabilitasyon, Büyük Tarabya Oteli, Deprem Riski, Sismik İzolasyon, |
| Reinforced Concrete Building, Rehabilitation, Grand Tarabya Hotel, Earthquake Risk, Seismic Intervention, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
EĞİTİMDE AKILLI ÖĞRETİM SİSTEMLERİ UYGULAMALARINA YÖNELİK BİR MODEL ÖNERİSİ
A MODEL PROPOSAL ON APPLICATIONS OF INTELLIGENT TUTORING SYSTEMS IN THE EDUCATION |
| Akıllı Öğretim Sistemi, Yapay Zekâ, Öğrenci Durum Tespiti, Bulanık Mantık, Ders, |
| Intelligent Tutoring System, Artificial Intelligence, Student Assessment, Fuzzy Logic, Lesson, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
KONUT ÜRETİMİ VE KONUT PAZARLAMASI: KIRŞEHİR İLİ ÖRNEĞİ
HOUSING PRODUCTION AND HOUSING MARKETING: A CASE STUDY FOR KIRSEHIR PROVINCE |
| Konut, Konut pazarlaması, Yerel pazarlama, Yap-sat uygulamaları, Konut Pazarlama Karması, |
| Housing, Housing marketing, Local marketing, Produce-sell applications, Housing Marketing Composition, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
YAPIŞTIRICI İLE BİRLEŞTİRİLMİŞ Z TİPİ BAĞLANTILARDA AÇININ ETKİSİ
THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS |
| Yapıştırycı, Yapıştırma, Gerilme analizi, Arayüz, Sonlu Elemanlar Metodu (SEM), |
| Adhesive, joint, stress analysis, interface, Finite Element Method (FEM), |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
YAPIM İŞLERİ GENEL ŞARTNAMESİ VE FIDIC KIRMIZI KİTAP İNŞAAT İŞLERİ GENEL ŞARTNAMESİNDEKİ RİSK VE SORUMLULUK DAĞILIMLARININ KANTİTATİF KARŞILAŞTIRILMASI
CANTITATIVE COMPARISON OF RESPONSIBILITIES’ AND RISKS’ DISTRIBUTION BETWEEN TURKISH GENERAL CONDITIONS OF CONSTRUCTION AND FIDIC RED BOOK GENERAL CONDITIONS |
| Yapım İşleri Genel Şartnamesi (YYGŞ), FIDIC Kırmızı Kitap İnşaat İşleri Genel Şartnamesi, Türkiye Müteahhitler Birliği, Sorumluluk, İnşaat Riskleri, |
| Turkish General Conditions of Construction (GCC), FIDIC Red Book General Conditions of Contract, Turkish Contractors Association, Liability, Construction Risks, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
OPTİMUM MALİYETLİ BİNA EBATLARININ YAPAY SİNİR AĞLARI (YSA) YARDIMIYLA BELİRLENMESİ
DETERMINING OPTIMUM COST BUILDING CHARACTERISTICS WITH ARTIFICIAL NEURAL NETWORKS (ANN) |
| Yapy Maliyeti, Toplu Konutlar, Yapay Sinir Ağları (YSA), Yapı Ön Tasarımı, Yapy Karakteristik Özellikleri, |
| Structure Cost, Collective Residential Buildings, Artificial Neural Networks (ANN), Structure Preplanning, Structural Characteristics, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
ALMAN KOLONYAL EDEBİYATI: HEİNRİCH VON KLEİST’IN “DİE VERLOBUNG İN ST.DOMİNGO BAŞLIKLI ESERİNDE IRK KAVRAMI
GERMAN COLONIAL LITERATURE: THE CONCEPT OF RACE IN HEINRICH VON KLEIST’S ST. DOMINGO |
| Kolonyalizm, Koloni Edebiyatı, Öteki, Irkçılık, Yapı Sökümcülük, |
| Colonialism, The Colonial Literature, The Other, Racism, Deconstructionism, |
|
Humanities Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
ISIL IŞLEM UYGULANMIŞ D-VTKA TUTKALI ILE YAPIŞTIRILMIŞ SARIÇAM (Pinus Slyvestrist L.) ODUNUN YAPIŞMA VE BASINÇ DIRENCI
COMPRESSION AND BONDING STRENGTH OF HEAT TREATED SCOTCH PINE (Pinus Slyvestrist L.) WOOD BONDED WITH D-VTKA ADHESIVE |
| Yapışma Direnci, Basınç Direnci, Isıl İşlem, Sarıçam (Pinus slyvetsris L.), Mekanik Özelikler, |
| Bonding Strength, Compression Strength, Heat Treatment, Scotch Pine (Pinus slyvetsris L.), Mechanical Properties, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
CO2 LAZER IŞIN KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI MALZEMELERİN (AISI 430-AISI 304) MİKROYAPI VE MEKANİK ÖZELLİKLERİNE YÜKSEK İLERLEME HIZININ ETKİSİ
THE EFFECTS OF HIGH WELDING SPEED ON MICROSTRUCTURE AND MECHANICAL PROPERTY OF DISSIMILAR WELDED COMPONENTS (AISI 430–AISI 304) BY CO2 LBW METHOD |
| Farklı Malzemeler (AISI 430–304), CO2 LBW, Kaynak Hızı, Mikroyapı, Mekanik Özellikler, |
| Dissimilar Components (AISI 430-304), CO2 LBW, Welding Speed, Microstructure, Mechanical Property, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
TÜRKİYE’DE İLKÖĞRETİM PROGRAMINDAKİ DEĞİŞİMLER: ÖĞRETMENLERİN ALGILAMALARI
CHANGES TO THE CURRICULUM OF PRIMARY SCHOOLS IN TURKEY: THE PERCEPTIONS OF TEACHERS |
| Yapılandırmacılık , Yapılandırmacı Program , İlköğretim Okulları , Program Geliştirme , Öğretmen Eğitimi, |
| Constructivism, Constructivist Curriculum, Primary Schools, Teacher Education, Curriculum Development, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
ÇALISMA YAPRAKLARININ ÖGRENCI BASARISI ÜZERINE ETKISI “ATOM KONUSU ILE ILGILI”
EFFECT OF WORKSHEET ON PERFORMANCE OF STUDENT “ON THE SUBJECT OF ATOM” |
| Çalisma Yapraklari, Bütünlestirici Ögrenme Kurami, Atom, ÖGRENCI BASARISI, KAVRAM YANILGISI, |
| Worksheet, Integrated Learning Theory, ATOM, PERFORMANCE OF STUDENT, MISCONCEPTION, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
İNSAN-BİLGİSAYAR ETKİLEŞİMİ ARACI OLARAK METİN TABANLI BİR DİYALOG SİSTEMİ İÇİN TÜRKÇENİN MORFOLOJİK VE ANLAMSAL ANALİZİ
MORPHOLOGICAL AND SEMANTIC ANALYSIS OF TURKISH LANGUAGE FOR TEXT BASED DIALOGUE SYSTEM AS A TOOL OF HUMAN-COMPUTER INTERACTION |
| İnsan-Bilgisayar Etkileşimi, Metin Tabanlı Diyalog Sistemi, Doğal Dil İşleme, Morfolojik ve Anlamsal Analiz, Yapay Zekâ, |
| Human-Computer Interaction, Text Based Dialogue System, Natural Language Processing, Morphological and Semantic Analysis, Artificial Intelligence, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
PETEK YAPILI SANDVİÇ YAPILARDA KÖPÜK DOLGUSUNUN KRİTİK BURKULMA YÜKÜNE ETKİSİ
EFFECT OF FOAM FILLING ON THE CRITIC BUCKLING LOAD OF THE HONEYCOMB SANDWICH STRUCTURES |
| Bal peteği sandviç yapılar, Köpük ilavesi, Kritik burkulma yükü, Basma testi, Kompozit malzeme, |
| Honeycomb sandwich structures, Foam addition, Critic buckling load, Compressive test, Composite material, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
PLAZMA TRANSFERLİ ARK KAYNAK YÜZEY İŞLEMİYLE AISI 304 PASLANMAZ ÇELİK YÜZEYİNE WC-Ni-B4C KOMPOZİT KAPLAMASININ MİKROYAPISAL KARAKTERİSTİĞİ
MICROSTRUCTURAL CHARACTERISTIC OF WC-Ni-B4C REINFORCED COMPOSITE COATINGS ON AISI 304 STAINLESS STEEL BY PLASMA TRANSFERRED ARC WELD SURFACING |
| PLAZMA TRANSFERLİ ARK KAPLAMA, MİKROYAPI, KARBÜRLER, ABRAZİF AŞINMA, BOR KARBÜR, |
| Plasma transferred arc coating, Microstructure, Carbides, Abrasive wear, Bor carbide, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
ZUR VERWENDUNG DER PARTİKEL “ALS” DES DEUTSCHEN UND İHRE ENTSPRECHUNGSFORMEN İM TÜRKİSCHEN
ALMANCADAKİ “ALS” SÖZCÜĞÜNÜN KULLANIMI VE TÜRKÇEDEKİ KARŞILIKLARI |
| Bağlaç, Edat, Dilsel Yapı, Karşılaştırma, Tamlama, |
| Konjunktion , Präposition, Sprachliche Struktur, Vergleich, Attribut , |
|
Humanities Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
AVRUPA BIRLIGI ÜÇÜNCÜ ve BESINCI GENISLEME SÜRECI ÇERÇEVESINDE TÜRKIYE-AB KATILIM MÜZAKERELERI KARSILASTIRMALI ANALIZI
WITHIN THE FRAMEWORK OF THE THIRD and FIFTH ENLARGEMENT PROCESS OF THE EUROPEAN UNION COMPARATIVE ANALYSIS OF TURKISH-EU ACCESSION NEGOTIATION |
| AVRUPA BIRLIGI, KÜRESELLESME, ENTEGRASYON, GENISLEME SÜRECI, YAPISAL UYUM, |
| EUROPEAN UNION, GLOBALIZATION, INTEGRATION, ENLARGEMENT PROCESS, STRUCTURAL ADJUSTMENT, |
|
Social Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
ELAZIĞ YÖRESİNDEKİ ARICILIK İŞLETMELERİNİN SOSYO-EKONOMİK YAPISININ BELİRLENMESİ
DETERMINATION OF SOCIO-ECONOMIC STRUCTURE OF BEEKEEPING ENTERPRISES IN ELAZIG REGION |
| Elazığ, Arıcılık, Arıcılık İşletmeleri, Sosyo-Ekonomik Yapı, Anket, |
| Elazig, Beekeping, Beekeping enterprises, Socio-economic structure, Questionnaire, |
|
Veterinary Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
ILKÖGRETIM MATEMATIK ÖGRETMEN ADAYLARININ ISPAT VE ISPAT YAPMAYA YÖNELIK TUTUMLARI
ELEMENTARY MATHEMATICS TEACHER CANDIDATES’ ATTITUDES TOWARDS PROOF AND PROVING |
| Tutum ölçegi, Matematiksel Ispat, Matematik Egitimi, Ögretmen adaylari, Ispat Yapma, |
| Attitude Scale, Mathematical Proof, Mathematics Education, Proving, Teacher candidates, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
ANALOJİLER, KAVRAM KARİKATÜRLERİ VE TAHMİN-GÖZLEM-AÇIKLAMA TEKNİKLERİYLE DESTEKLENMİŞ FEN VE TEKNOLOJİ EĞİTİMİ
SCIENCE AND TECHNOLOGY EDUCATION BASED ON ANALOGIES, CONCEPT CARTOONS AND PREDICT-OBSERVE-EXPLAIN TECHNIQUES |
| Fen ve Teknoloji Eğitimi, Kavram Karikatürleri, Tahmin-Gözlem-Açıklama, Analojiler, Yapılandırmacı Öğrenme Yaklaşımı, |
| Science and Technology Education, Concept Cartoons, Predict-Observe-Explain Technique, Analogies, Constructivist Learning Theory, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
YAPILANDIRMACI ÖĞRENME ORTAMI ÜZERİNDE ETKİLİ OLABİLECEK BİR DEĞİŞKEN: ÖĞRETİM STİLİ TERCİHİ
A VARIABLE WHICH CAN BE EFFECTIVE IN CONSTRUCTIVIST LEARNING ENVIRONMENTS: TEACHING STYLE PREFERENCE |
| Yapılandırmacılık, Öğrenme Ortamı, Öğretim Stili, Öğretmen, Öğrenme, |
| Constructivism, Learning Environment, Teaching Style, Teacher, Learning, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
GELİŞTİRİLEN BİR YAPISAL ANALİZ PROGRAMIYLA YIĞMA YAPILARIN ANALİZİ
ANALYSES OF MASONRY STRUCTURES WITH A DEVELOPING STRUCTURAL ANALYSIS SOFTWARE |
| FEMMAS, Yığma Yapılar, Sonlu Elemanlar Metodu, LUSAS, Doğrusal Analiz, |
| FEMMAS, Masonry Structures, Finite Element Method, LUSAS, Linear Analysis, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
NORMAL VE NORMAL OLMAYAN KALP SESLERİNİN YAPAY SİNİR AĞLARI İLE SINIFLANDIRILMASI
CLASSIFICATION OF THE NORMAL AND ABNORMAL HEART SOUNDS VIA ARTIFICIAL NEURAL NETWORK |
| Yapay Sinir Ağları, Ayrık Fourier Dönüşümü, Kalp Sesleri, Mobil Programlama, Sinyal İşleme, |
| Artificial Neural Network, Discrete Fourier Transform, Heart Sounds, Mobile Programming, Signal Processing, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
YAPI MALİYETİNİN FONKSİYONEL ELEMAN YÖNTEMİ İLE TAHMİNİ
FORECAST OF CONSTRUCTION COSTS WITH FUNCTIONAL ENTITY METHOD |
| Yapı Maliyeti, Fonksiyonel Eleman Yöntemi, Regresyon Analizi, Toplu Konut, Bina, |
| Construction Costs, Functional Entity Method (FEM), Regression Analysis, Housing, Building, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
İNŞAAT PROJELERİNDE SÖZLEŞME RİSKLERİNİN DEĞERLENDİRİLMESİNDE KULLANILAN YÖNTEMLERİN ANALİZİ
ANALYSIS OF THE CONSTRUCTION CONTRACT RISKS AND THE METHODS OF EVALUATING THESE RISKS’ EFFECTS |
| Sözleşme riskleri, Risk paylaşımı, Risk Etki Değerlendirmesi, FIDIC, Yapım İşleri Genel Şartnamesi, |
| Contract Risks, Risk Sharing, Evaluation of Risk Effects, FIDIC, Turkish General Conditions of Construction Works, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
AYNI İKİ TİP OKUL BİNASININ GÜÇLENDİRME ÖNCESİ VE SONRASI KARŞILAŞTIRILMASI
THE COMPARISON OF THE TWO SAME TYPE SCHOOL BUILDINGS BEFORE AND AFTER STRENGTHENING |
| Okul Binası, Deprem, Yapım Maliyeti, Güçlendirme, Güçlendirme Maliyeti, |
| School Building, Earthquake, Construction Cost, Strengthening, Strengthening Cost, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
HENDEK’TE SANAYİNİN YAPISI VE DAĞILIŞI
THE STRUCTURE AND DISTRIBUTION OF INDUSTRY IN HENDEK IN TURKEY |
| Sakarya, Hendek, Ulaşım, Sanayinin Dağılışı, Sanayinin Yapısı, |
| Sakarya, Hendek, Transportation, Distribution of industry, The Industry's Structure, |
|
Nature Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
DEPREM TEHDİDİ ALTINDAKİ MÜHENDİSLİK YAPILARININ HAKİM TİTREŞİM PERİYOTLARININ BELİRLENMESİNDE YENİ BİR SEÇENEK: MİKROTREMOR YÖNTEMİ VE ÖRNEK UYGULAMASI
NEW METHOD TO DETERMINATION OF FUNDAMENTAL FREQUENCY OF ENGINEERING STRUCTURES AGAINST EARTHQUAKE HAZARD: MICROTREMOR METHODS AND CASE STUDY |
| Zemin-Yapı Etkileşimi, Mikrotremor, Nakamura Tekniği, Titreşim Frekansı, İstanbul Üniversitesi, |
| Soil-Structure Interaction, Nakamura’s Technique, Frequency of Vibration, İstanbul University, Microtremor, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
DEĞER KODLAMASI KULLANARAK UZAY KAFES SİSTEMLERİNİN GENETİK ALGORİTMA İLE MİNİMUM AĞIRLIKLI BOYUTLANDIRILMASI
LEAST WEIGHT DESIGN OF SPACE TRUSSES BY USING VALUE ENCODING IN GA WITH DISCRETE DESIGN VARIABLES |
| Genetik Algoritma, Optimizasyon, Uzay Kafes Yapılar, Ayrık Tasarım Değişkenleri, Değer Kodlaması, |
| Genetic Algorithm, Optimization, Space Truss Structure, Discrete Design Variable, Value Encoding, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
YAPAY SİNİR AĞLARI İLE KISA KONSOLLARIN DONATI TAYİNİ
THE DETERMINATION OF THE REINFORCEMENT STEEL OF THE SHORT CANTILEVERS WITH ARTIFICIAL NEURAL NETWORK |
| Yapay Sinir Ağı, Geri Yayılım Ağı, Kısa Konsol, Matlap, Yapısal Analiz, |
| Artificial Neural Network, Backpropagation Neural Network, Short Cantilever, Matlap, Structural Analysis, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
DEPREM VERİLERİNİN YAPILARIN DİNAMİK PARAMETRELERİNİN BELİRLENMESİNDE KULLANIMI
IDENTIFICATION OF DYNAMIC PARAMETERS OF STRUCTURES USING EARTHQUAKE DATA |
| Girdi-Çıktı Sistem Tanı(m)lama Yöntemleri, Yapı Dinamiği, Yapıların Enstrümentasyonu, Çelik Yapılar, Kuvvetli Yer Hareketi, |
| Input-output System Identification Methods, Structural Dynamics, Instrumentation of Structures, Steel Moment Resisting Frames, Strong Ground Motion, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
BİLİŞİM TEKNOLOJİLERİNİN EVRİMİNİN YAPI TASARIM VE ÜRETİM SÜRECİNDEKİ ETKİLERİ
INFLUENCE OF THE EVOLUTION OF INFORMATION TECHNOLOGIES ON CONSTRUCTION DESIGN AND PRODUCTION PROCESSES |
| Değişim, Dijital Teknoloji, Enformasyon Teknolojisi, Yapım, Dönüşüm, |
| Changes, Digital Technology, Information Technology, Construction, Transformation, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
TÜRKİYE KIRSALINDA KADIN İŞGÜCÜ (1990–2000)
THE WOMEN LABOR-FORCE IN RURAL TURKEY (1990-2000) |
| Türkiye, Çalışan Nüfus, Kadın İşgücü, Kırsal Kesim, Sosyo-Ekonomik Yapı, |
| Turkey, Working Population, Women Labor-Force, Rural Area, Socioeconomic Constitution, |
|
Nature Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
İNŞAAT TEKNİKERLİĞİ EĞİTİMİ KAPSAMINDA VERİLEN İŞLETME YÖNETİMİ DERSİ İÇİN GENİŞ AMAÇLI BİR UYGULAMA: AHİ EVRAN ÜNİVERSİTESİ, KAMAN MYO ÖRNEĞİ
A BROAD PURPOSED APPLICATION OF MANAGEMENT COURSE GIVEN IN CONSTRUCTION TECHNICIAN EDUCATION: AN EXAMPLE OF AHİ EVRAN UNIVERSITY KAMAN VOCATIONAL SCHOOL |
| Teknik Eğitim, Yapı Eğitimi, İnşaat Teknikerliği Eğitimi, İşletme Yönetimi, Meslek Yüksek Okulu (MYO), |
| Technical Education, Construction Education, Construction Technician Education, Management, Vocational School, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
İLKÖĞRETİMDE “MADDENİN İÇYAPISINA YOLCULUK” KONUSUNUN ÖĞRETİMİNDE YAPILANDIRMACI YAKLAŞIMIN ETKİSİ
THE EFFECT OF CONSTRUCTIVIST APPROACH TO THE TEACHING OF THE UNIT “JOURNEY TO THE INNER STRUCTURE OF MATTER |
| Yapılandırıcı yaklaşım, geleneksel yaklaşım, maddenin içyapısı, ÖĞRETİM, KİMYA EĞİTİM, |
| Constructivist Teaching, Traditional Teaching, Inner Structure of Matter, CHEMISTRY EDUCATION, TEACHING, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
SIVILARIN KALDIRMA KUVVETİ KONUSUNUN ÖĞRETİMİNDE YAPILANDIRMACI YAKLAŞIMIN ÖĞRENCİ BAŞARISINA ETKİSİ
THE EFFECT OF CONSTRUCTIVE TEACHING APPROACH ON STUDENTS’ SCIENCE ACHIEVEMENT IN BUOYANCY FORCE |
| Yapılandırmacı Öğretim, Fen Bilgisi, Sıvıların Kaldırma Kuvveti, Yedinci Sınıf İlköğretim Öğrencileri, Başarı, |
| Constructivist Teaching, Science Education, Buoyancy Force, Seventh Grade Primary School Students,, Achievement, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
ÖĞRETMEN EĞİTİMİNDE YENİ BİR OLANAK: WWW ve SOSYAL OLUŞTURMACILIK
WWW and Social Constructivism: A New Opportunity For Teacher Education |
| WWW, Yapılandırmacılık, Sosyal Oluşturmacılık, Web Tabanlı Eğitim, |
| WWW, Constructivism, Social Constructivism, Web-based Education, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
KÜLTÜREL YAPI VE DİNÎ KODLARIN KİTLE İLETİŞİM ARAÇLARINDA SUNUMU
CULTURAL STRUCTURE AND RELIGIOUS CODES BEING REPRESENTED ON PUBLIC COMMUNICATION TOOLS |
| KÜLTÜREL KOLAR, MEDYA, İDEOLOJİ, TANRI-KUL İLİŞKİSİ, SOSYOKÜLTÜREL YAPI, |
| CULTURAL CODES, PRESS, IDEOLOGY, GOD-MAN RELATIONS, SOCIO-CULTURAL STRUCTURE, |
|
Humanities Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
Tİ51Nİ49 KOMPOZİTİNİN CU-Nİ ARA TABAKALI DİFÜZYON KAYNAĞINDA SICAKLIK VE SÜRENİN BİRLEŞMEYE ETKİSİNİN ARAŞTIRILMASI
THE INVESTIGATION OF THE EFFECT ON THE JOINING OF TEMPERATURE AND PERIOD ON THE Cu-Ni INTERLAYER DIFFUSION BONDING OF Ti51Ni49COMPOSITE |
| Ti51Ni49, Toz Metalurjisi, Cu-Ni Ara Tabaka, Ti51Ni49, Difüzyon Kaynağı, Mikroyapı, |
| Ti51Ni49, Powder Metallurgy, Cu-Ni Interlayer, Microstructure, Bonding, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
BİR DİZEL MOTORUN MoN KAPLANMIŞ KOMPRESYON SEGMANININ YÜZEY DAVRANIŞININ DENEYSEL ARAŞTIRMASI
AN EXPERIMENTAL INVESTIGATION OF SURFACE BEHAVIOUR OF MoN COATED COMPRESSION RING OF A DIESEL ENGINE |
| Dizel Motor, Kompresyon Segmanı, MoN Kaplama, Sert Kaplama, Yüzey Yapısı, |
| Diesel Engine, Compression Rings, MoN Coating, Hard Coatings, Surface Behaviour, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
ÖĞRENME NESNELERİNİN ÖĞRENME BOYUTU
LEARNING DIMENTION OF LEARNING OBJECTS |
| ÖĞRENME NESNELERİ, YAPILANDIRMACI YAKLAŞIM, ÖĞRENME, ÖĞRENME NESNELERİ TASARIMI, WEB DESTEKLİ ÖĞRETİM, |
| LEARNING OBJECTS, CONSTRUCTIVISM, LEARNING, LEARNING OBJECTS DESIGN, WEB SUPPORTED INSTRUCTION, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
FIRAT HAVZASI’NDAKİ EKSİK AKIM VERİLERİNİN KORELÂSYON VE YAPAY SİNİR AĞLARI METOTLARI İLE TAHMİN EDİLMESİ
THE ESTIMATION OF MISSING FLOW RECORDS BY CORRELATION AND NEURAL NETWORKS IN FIRAT BASIN |
| Fırat Havzası, Göynük Çayı, Eksik Akım Verileri, Yapay Sinir Ağları, -, |
| Fırat Basin, Göynük Stream, Missing Flow Records, Neural Networks, -, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
SAĞLIKLI KENTLEŞME SÜRECİ ESASLARI
THE MAINS OF HEALTHY URBANIZATION PROCESS |
| Kent, Kentleşme, Sağlıklı Kentleşme, Kaçak Yapılaşma, Gecekondu, |
| Urban, Urbanization, Healthy Urbanization, Shanty Settlements, Slum House, |
|
Social Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
GENLEŞTİRİLMİŞ KİL AGREGALI HAFİF BETON KULLANIMININ YAPI DAVRANIŞI VE KABA YAPI MALİYETİNE ETKİSİ
THE EFFECTS OF USE OF EXPANDED CLAY AGGREGATE CONCRETE ON STRUCTURAL BEHAVIOUR AND BASIC STRUCTURE COST |
| Genleştirilmiş kil agregalı beton, yapı davranışı, kaba yapı, maliyet, HAFİF BETON, |
| Expanded clay aggregate concrete, structural behavior, basic structure, cost, lightweight concrete, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
ETKİLEŞİMLİ BİR BENZETİM YAZILIMI İLE YAPILANDIRMACI BİR ÖĞRETİM MATERYALİNİN TASARLANMASI VE ÖĞRETMEN ADAYLARININ GÖRÜŞLERİ: TRANSFORMATÖRLER
Prospective Teachers’ Views about Integration of Simulation Softwares to Constructivist Learning Theory: Transformers |
| Fizik Öğretmenliği , Simülasyon , Yapılandırmacılık, Transformatörler, Öğretim, |
| SIMULATION, CONSTRUCTIVISM, TRANSFORMERS, PROSPECTIVE TEACHERS, SIMULATION SOFTWARE, |
|
Education Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
THE IMPORTANCE OF EMOTIONAL ASPECTS IN MEDIA-BASED KNOWLEDGE TRANSFER AND E-LEARNING
MEDYA TABANLI BİLGİ TRANSFERİ VE E-ÖĞRENMEDE DUYGUSAL DURUMUN ÖNEMİ |
| Medya Yeterliliği, Duygusal Öğrenme, Yapılandırmacılık, Medya Tabanlı Öğrenme, Nöroloji, |
| Media-adequacy, Emotional-Based Learning, Constructivism, Media-Based Learning, Neuroscience, |
|
Humanities Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
ZAMANTI ÇAYI YUKARI HAVZASI (UZUNYAYLA)’NIN JEOMORFOLOJİSİ
GEOMORPHOLOGY OF ZAMANTI STREAM’S UPPER BASIN (UZUNYAYLA) |
| Uzunyayla,, Uzunyayla Platosu, Zamantı Çayı, Yapısal plato, Dağ arası havza, |
| Uzunyayla, Uzunyayla Plateau, Zamantı Stream, Structural plateau, intermountain basin, |
|
Nature Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
FARKLI TAHMİN YÖNTEMLERİ KULLANILARAK KIRMATAŞ KALKER AGREGALI BETONLARIN BASINÇ DAYANIMININ BELİRLENMESİ
DETERMINING THE COMPRESSIVE STRENGTH OF CRUSHED LIMESTONE AGGREGATE CONCRETE USING DIFFERENT PREDICTION METHODS |
| Yapay Sinir Ağları, Regresyon tekniği, Beton, Basınç Dayanımı, kırmataş kalker agregası, |
| Artificial Neural Networks, Regression technique, Concrete, Compressive strength, crushed lımestone aggregate, |
|
Technological Applied Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
YAPI MALİYETİNİN FONKSİYONEL ELEMAN YÖNTEMİ İLE TAHMİNİ; BİR UYGULAMA ÇALIŞMASI
FORECASTING CONSTRUCTION COSTS WITH FUNCTIONAL ENTITY METHOD; A PRACTICE STUDY |
| Yapı Maliyeti, Fonksiyonel Eleman Yöntemi, Regresyon Analizi, YAPI EĞİTİMİ, PROJE PLANLAMA, |
| Construction Costs, Functional Entity Method, Regression Analysis, CONSTRUCTION EDUCATING, PROJECT PLANNİNG, |
|
Technological Applied Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
MİMARLIK EĞİTİMİNDE “YAPARAK ÖĞRENME”
“LEARNING BY BUILDING” IN ARCHITECTURAL EDUCATION |
| Mimarlık Eğitimi, Yaparak Öğrenme, Örnek Uygulamal, |
| Architectural Education, Learning by Building, Cas, |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|
A PROPOSAL TO SURVEY THE STRUCTURING PROCESS IN URBAN AREAS IN OUR COUNTRY: AIR LIDAR (LIGHT DETECTION AND RANGING)
ÜLKEMİZDE KENTSEL ALANLARDA YAPILAŞMA SÜRECİNİN İZLENİLMESİ İÇİN BİR ÖNERİ: HAVA LIDAR (LIGHT DETECTION AND RANGING) |
| Geography, LIDAR, Urban, Structure, Planning, |
| Coğrafya, LIDAR, Kent, Yapı, Planlama, |
|
Nature Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|
Al/SiC METAL KÖPÜKLERİN ÜRETİMİ ve MİKROYAPISI
MICROSTRUCTURE AND PRODUCED OF Al/SiC METAL FOAMS |
| Al , TiH2, SiC, Metal Köpük, Mikroyapı., |
| Al, TiH2, SiC, Metal Foam, Microstructure., |
|
Technological Applied Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|
BETONARME BİR BİNADA YILLIK ISI KAYBI VE ENERJİ İHTİYACININ YAPAY SİNİR AĞLARI İLE BELİRLENMESİ
DETERMINATION OF ANNUAL HEAT LOSS AND REQUIREMENT OF ENERGY IN A REİNFORCED CONCRETE BUILDING BY ARTIFICIAL NEURAL NETWORKS |
| Yapay Sinir Ağları, Isı Kaybı, Enerji İhtiyacı, Ya, |
| Artificial Neural Networks, Loss of Heat, Requirem, |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 2, Published Date : 1.04.2008 |
|
|
A BRIEF VIEW OF JACQUES DERRIDA’S DECONSTRUCTION ANDHERMENEUTICS
JACQUES DERRIDA’NIN YAPISAL ÇÖZÜM VE YORUMLAMASINA EGITIM VASITASIYLA KISA BIR BAKIS |
| Jacques Derrida, Post-Structuralism, Literary Theo, |
| Jacques Derrida, Post-Yapisalcilik, Edebi Teori ve, |
|
Humanities Sciences, Year : 2008, Volume : 3, Issue : 2, Published Date : 1.04.2008 |
|
|
SİLİS DUMANI KATKILI BETONLARIN ÇARPMA DAYANIMININ
YAPAY SİNİR AĞI İLE BELİRLENMESİ
DETERMINATION OF THE BUMPING RESISTANCE OF THE CONCRETE ADULTERATED SILICA FUME BY ANN |
| Yapay sinir ağı, Geri yayılım algoritması, Silis d, |
| Artificial Neural Network, Back Backpropagation , , |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 1, Published Date : 1.01.2008 |
|
|
YAPILAR NASIL HASTALANIR?
HOW CONSTRUCTION ARE SICK? |
| Yapı, Bina, Yalıtım, Vandalizm, Hastalık, |
| Construction, Building, Insulation, Vandalism, Sickness, |
|
Engineering Sciences, Year : 2007, Volume : 2, Issue : 1, Published Date : 1.01.2007 |
|
|
BUILDING, CONSTRUCTED REGIONS AND THE EARTHQUAKE IN KOCAELI
KOCAELİ’DE YAPI, YAPILI ÇEVRELER VE DEPREM |
| Kocaeli, Earthquake, Building, Habitation Area,, |
| Kocaeli, Deprem, Yapı, Yerleşim Alanı,, |
|
Engineering Sciences, Year : 2007, Volume : 2, Issue : 1, Published Date : 1.01.2007 |
|
|
BİNA YAPIM SİSTEMLERİ: İSPANYA-SEVİLLA ÖRNEKLEMİ
CONSTRUCTION SYSTEMS OF BUILDINGS: SPAIN-SEVILLA SAMPLING |
| Yapı, Bina, Kentleşme, Sevilla,, |
| Construction, Building, Urbanization, Sevilla,, |
|
Technological Applied Sciences, Year : 2007, Volume : 2, Issue : 1, Published Date : 1.01.2007 |
|
|
SAĞLIK YAPILARININ BİYOSÜREÇ VE BİYOHARMOLOJİ AÇISINDAN İNCELENMESİ
EXAMINATION OF HEALTH BUILDINGS BY VISIONS OF BIOTERM AND BIOHARMOLOGY |
| Biyoharmoloji, Biyosüreç, Sağlık Yapıları, İklimsellik, Yapı, |
| Bioharmology, Bioterm, Health Buildings, Climately, Building, |
|
Engineering Sciences, Year : 2006, Volume : 1, Issue : 3, Published Date : 1.07.2006 |
|
|
BİYOHARMOLOJİ
BIOHARMOLOGY |
| İnsan, , Yapı-Bina, Çevre, Ergonomi, Tasarım, |
| Human , Construction-Building, Environment, Ergonomy, Draft, |
|
Engineering Sciences, Year : 2006, Volume : 1, Issue : 2, Published Date : 1.04.2006 |
|
|